Hi All,
Thought I'd post up and see if anyone can help. I have a newer Husqvarna trimmer, just purchased end of last season. I think its this model, or very close to it http://www.husqvarna.com/us/products/trimmers/128l/952711946/
The first couple runs of fuel were using a pre-mixed solution that came with it (some promotional thing home depot was running). It ran great, but seemed to stall if it idled for any amount of time. I thought, OK, maybe its just breaking in.
After a couple uses now, it still stalls idling, even sufficiently warmed up. Now the fuel is a mixture of 93 octane and the provided oil. It runs great, starts right up, but dies at idle. is this normal? I had an older much cheaper Toro that never stalled at idle.
Any ideas welcome.
Thought I'd post up and see if anyone can help. I have a newer Husqvarna trimmer, just purchased end of last season. I think its this model, or very close to it http://www.husqvarna.com/us/products/trimmers/128l/952711946/
The first couple runs of fuel were using a pre-mixed solution that came with it (some promotional thing home depot was running). It ran great, but seemed to stall if it idled for any amount of time. I thought, OK, maybe its just breaking in.
After a couple uses now, it still stalls idling, even sufficiently warmed up. Now the fuel is a mixture of 93 octane and the provided oil. It runs great, starts right up, but dies at idle. is this normal? I had an older much cheaper Toro that never stalled at idle.
Any ideas welcome.