http://www.fuchslubricants.com/index.php?calling=titanxtl
FUCHS Presents Groundbreaking New Engine Oil Technology
Faster, stronger, better for the engine: The new FUCHS XTL™ engine oil technology with its extremely high Viscosity Index* and outstanding ageing stability ensures even faster oil circulation and lower fuel consumption.
Advanced engine oils for cars which meet the demands of the engine manufacturers already offer very high performance levels. But the stresses on engine oils are increasing, for example as a result of downsized engine designs. And the climatic conditions in which engines must perform reliably are getting more extreme. Furthermore, fuel-saving technologies such as Stop-Start Systems make additional demands on the starting characteristics and lubrication reliability of the engine oil. The load on the engine oil increases noticeably over the entire manufacture’s recommended oil change interval. It is increasingly important that the oil circulates rapidly to the areas where it is needed.
Good reasons for FUCHS, the leading German automotive factory-fill specialist, to develop a new engine oil technology which offers additional, long-term performance reserves. The decisive technological advance of this new base oil technology is the optimised Viscosity-Temperature behaviour. Compared to conventional base oils, the new XTL™ technology offers a particularly high Viscosity Index. This means very low temperature-related fluctuations in viscosity and outstanding performance potential in extremely hot and extremely cold ambient conditions.
* Oils with a low viscosity index show stronger temperature-related viscosity change than oils with a high viscosity index.
Performance was tested in a complex series of tests: For example, an engine oil with today’s conventional SAE 5W-30 technology was tested against an engine oil of the same viscosity but based on the new XTL™-technology in a refrigerated chamber at –27 °C to examine the corresponding start-up behaviour. All-in-all, the tests confirmed the significant benefits of XTL™ engine oil technology compared to conventional SAE 5W-30 engine oils:
Easier cold start-ups:
Up to 55 % faster oil circulation and up to 35 % faster start-ups
Lower fuel consumption:
Up to 1.7 % additional reductions in fuel consumption
Lower oil consumption:
Up to 18 % lower
Improved ageing stability:
38 % lower viscosity increase. Thus greater performance and operational reliability over the whole oil change interval.
Differing somewhat in specifications but all approved by leading engine manufacturers, the Premium engine oils TITAN GT1 SAE 0W-20, TITAN GT1 PRO FLEX SAE 5W-30, GT1 PRO C-3 SAE 5W-30 and TITAN GT1 SAE 5W-40 are all formulated with the new XTL™ technology.
FUCHS Presents Groundbreaking New Engine Oil Technology
Faster, stronger, better for the engine: The new FUCHS XTL™ engine oil technology with its extremely high Viscosity Index* and outstanding ageing stability ensures even faster oil circulation and lower fuel consumption.
Advanced engine oils for cars which meet the demands of the engine manufacturers already offer very high performance levels. But the stresses on engine oils are increasing, for example as a result of downsized engine designs. And the climatic conditions in which engines must perform reliably are getting more extreme. Furthermore, fuel-saving technologies such as Stop-Start Systems make additional demands on the starting characteristics and lubrication reliability of the engine oil. The load on the engine oil increases noticeably over the entire manufacture’s recommended oil change interval. It is increasingly important that the oil circulates rapidly to the areas where it is needed.
Good reasons for FUCHS, the leading German automotive factory-fill specialist, to develop a new engine oil technology which offers additional, long-term performance reserves. The decisive technological advance of this new base oil technology is the optimised Viscosity-Temperature behaviour. Compared to conventional base oils, the new XTL™ technology offers a particularly high Viscosity Index. This means very low temperature-related fluctuations in viscosity and outstanding performance potential in extremely hot and extremely cold ambient conditions.
* Oils with a low viscosity index show stronger temperature-related viscosity change than oils with a high viscosity index.
Performance was tested in a complex series of tests: For example, an engine oil with today’s conventional SAE 5W-30 technology was tested against an engine oil of the same viscosity but based on the new XTL™-technology in a refrigerated chamber at –27 °C to examine the corresponding start-up behaviour. All-in-all, the tests confirmed the significant benefits of XTL™ engine oil technology compared to conventional SAE 5W-30 engine oils:
Easier cold start-ups:
Up to 55 % faster oil circulation and up to 35 % faster start-ups
Lower fuel consumption:
Up to 1.7 % additional reductions in fuel consumption
Lower oil consumption:
Up to 18 % lower
Improved ageing stability:
38 % lower viscosity increase. Thus greater performance and operational reliability over the whole oil change interval.
Differing somewhat in specifications but all approved by leading engine manufacturers, the Premium engine oils TITAN GT1 SAE 0W-20, TITAN GT1 PRO FLEX SAE 5W-30, GT1 PRO C-3 SAE 5W-30 and TITAN GT1 SAE 5W-40 are all formulated with the new XTL™ technology.
Last edited: