MSDS Analysis

[ebaker]

I finally found the MSDS on GM E.O.S. Are there any ingredients that look like they may be a problem in prolonged use? I see some VII's and possibly Group 1 oils. Anything that might be a problem if used as a qt. additive?
.............
CAS# FORMULATION W/V CHEMICAL NAME
000122394 < 0.0000/ 1.0000% W DIPHENYLAMINE

036878203 R 0.7200/ 3.5400% W Benzenamine, ar-nonyl-N-{nonylphenyl)-

063148629 T 0.0000/ 0.0000% W SF-96

064742536 < 0.0000/ 43.3000% W MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED [severe LIGHT NAPHTHENIC

064742547 < 0.0000/ 43.3000% W MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED [severe) HEAVY PARAFFINIC

064742650 < 0.0000/ 43.3000% W MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY PARAFFINIC severe solvent-refining and/or hydrotreatment

068649423 R 3.6000/ 7.1600% W Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts

068855458 R 0.7200/ 3.5400% W Phenol, dodecyl-, sulfurized, calcium salts

071786475 R 0.7200/ 3.5400% W Benzenesulfonic acid, mono- and dialkyl derivs., magnesium salts

075975858 R 0.7200/ 3.5400% W Benzene, polypropene derivs., sulfonated, calcium salts

078330128 < 0.0000/ 1.0000% W Benzenesulfonic acid, mono- and di-C15-30-alkyl derivs., sodium salts

084605209 R 7.2300/ 14.4600% W Amines, polyethylenepoly-, reaction products with succinic anhydridepolyisobutenyl derivs.

103650959 R 3.6000/ 7.1600% W POLYOLEFIN ESTER

989986130 R 0.7200/ 3.5400% W ALKENYL ESTER SULFIDE

989986508 = 27.7000/ 0.0000% W PETROLEUM OILS, HYDROTREATED OR SOLVENT REFINED

SECTION 2 - OTHER INFORMATION: CAS 64742-54-7, 64742-65-0 AND
64742-53-6 TOGETHER COMPRISE 39.8-43.3% OF THE TOTAL PRODUCT.

 

[rugerman1]

Virgin Oil Analysis Samples » GM EOS additive

 

[ebaker]

Someone mentioned in an earlier thread that it might contain brightstock or low quality VII's. Are these present? Too much sulfur and magnesium (ash)?

 

[fuel tanker man]

Yeah, it would be nice to have one of the chemical types here dissect this for us.

Thanks for posting the MSDS.

I too am interested in the long term application potential...

Dan

 

[TallPaul]

Maybe this huge list of CAS numbers would help?

 

[ebaker]

thanks

 

[MolaKule]

I would strongly recommend AGAINST using a whole can unless you're doing a run-in on a rebuiilt engine, and use for
Problem with this stuff is it is an old formulation and is high in ash-type metallo-organic compounds.

I don't know how much EOS costs, but our SX-UP per pint does more and has the latest AW and synthetic base oils with special organic friction modifiers.