Bit late to this, but important update. Since installing the Bilstein B6 struts on the van I wanted a heavy duty end link also. So the shop and I purchase the Moog, Mevotech and Duralast heavy duty end links for the 2020 Connect. Over the weekend, we drove with these end links to see if they suited the van. The end result, all three of these end links damaged the van's inner fire wall/chases/frame. Deep gashes on the frame and at one point at one of the end links got lodged between the coil springs and firewall/frame. We sent word to all three manufactures and only Duralast removed these links as being suitable for the Connect. Mevotech and Moog have yet to comment or remove these links from the vehicle drop down. Duralast was disappointed in hearing that their end links would not articulate correctly on the van and sent us another set of cheaper end links. While posting this several months ago, an Amazon vendor claiming to be with Zeder Corp ask if they could help with the van build. They sent us a set of their Super-pro 300mm-345mm Volvo end links. We've yet to adjust these because we're still searching for a performance sway bar for the van. Moral of the story, if you purchase something from a site that lists it for your vehicle and it doesn't actually fit, contact the part manufacture and let them know as well as send pictures.. because to them.. it looks good on paper, yet no one has actually fitted these products on their vehicles until it's too late.
View attachment 147238
Deep gashes on the inner firewall/frame right beside the B6 strut