List an oil Additive you'd use / No Comments

With my last oil change which was Valvoline Premium Blue Extreme 5w-40, I added, or rather replaced a quart of oil with Lucas Pure Syn, with a few ounces of Hot Shots FR3. In fuel I run Lucas Upper Cylinder Lube and a bottle of Techron just before or after every oil change.
 
Eurol Engine Treat (Tungsten & AN)

(only with oils not containing Vanderbilt Vanlube W-324)
testing this since august, halfdose. (y)


next year :
(tungsten,ester)
600

 
Was given a couple bottles of 'damaged' BG MOA and used it in the two trucks in the recent oil change.
 
testing this since august, halfdose. (y)


next year :
(tungsten,ester)
600

I also use the above, Lubegard Biotech, Redline SI-1
I felt Molygen effect only start to be pronounced after 5k km, engine more peppy, tiny bit less noisy, average oil temp 2 centigrade less on light driving.
 
I normally use Lubegard Biotech, but I recently put a bottle of Moly EP mixed with 8 oz of MMO in my old 1989 Toyota truck (3VZE). The engine feels like it's running smoother - especially at start up. I'm wondering if anyone has made a 50-50 brew of Lubegard and Moly EP?
 

Attachments

  • LG&Mep.jpg
    LG&Mep.jpg
    162.6 KB · Views: 24
Started using zmax to clean up gummed up ring packs.
So far it's made the most noticeable positive change.
Previously I have used liquimoly proline engine flush x2, redline sl-1 x2, an gumout highmileage x2.
 
Back
Top