I'm done w/ hand pumping gear oil

[rondg]

just installed a magnetic drain plug...

no more pumping! soooooooooo easy. set your air regulator to a very low psi

 

[97prizm]

View attachment 292604

View attachment 292605


just installed a magnetic drain plug...

no more pumping! soooooooooo easy. set your air regulator to a very low psi

Do you hook this up to your air compressor?

 

[FowVay]

That's a great idea. I'm going to try it on my next transmission service. Of course, the pressure will be turned wayyyyy down. I too am tired of pumping 2 gallons of oil into a transmission by hand.

 

[Cujet]

I've done that! Works pretty well. Somehow I always make a mess.

 

[D60]

The pumps for 5 gal buckets are a very different matter, I don't mind them much. They go pretty quick. But I'm using them under a 2-post.

 

[Rust_Belt_Pete]

Look I have one of them air powered mity vacs. I still use smaller hand pump unit. Less hassle and noise and hoses.

 

[panthermike]

That's a great idea! I now service diffs/trans by using a garden sprayer with a modified tip. Just pump and hold the handle to dispense. But this is a great option.

 

[Dave1027]

That's a great idea. I'm going to try it on my next transmission service. Of course, the pressure will be turned wayyyyy down. I too am tired of pumping 2 gallons of oil into a transmission by hand.

I've always used a gallon garden sprayer. Only need to pump it a few times then pop open a cold one and watch it do the work.

 

[Dave1027]

View attachment 292605

no more pumping! soooooooooo easy. set your air regulator to a very low psi

What is on the end of the hose holding it into the diff? Does it allow overflow?

 

[rondg]

What is on the end of the hose holding it into the diff? Does it allow overflow?

it's just the tip from my hand pump

 

[nwjones18]

Looks good. I've been using one of those $15 12v extraction pumps on my last couple jobs and really like it.

https://www.amazon.com/Extractor-Upgraded-Transfer-Scavenge-Motorbike/dp/B0C7VXWJHP/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.3afbfb03-37f9-433d-812b-5618f5fce9ff:amzn1.sym.3afbfb03-37f9-433d-812b-5618f5fce9ff&crid=1DWQCDY7ULWD5&cv_ct_cx=12v+oil+pump&keywords=12v+oil+pump&pd_rd_i=B0C7VXWJHP&pd_rd_r=bc6d3f22-46f8-4373-99fe-d6d7fd025cb8&pd_rd_w=LYGLC&pd_rd_wg=sJg3H&pf_rd_p=3afbfb03-37f9-433d-812b-5618f5fce9ff&pf_rd_r=EGAB8FBAFRKFAZJ53434&qid=1753981315&sbo=RZvfv//HxDF+O5021pAnSA==&sprefix=12v+oil+pump,aps,252&sr=1-3-6024b2a3-78e4-4fed-8fed-e1613be3bcce-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1

Worth noting I haven't tried it with true gear oil, but it pumps motor oil and hydraulic fluid just fine.

 

[Arc]

Great idea. Wish I had known that earlier this year when I did the front and back diff plus transfer case. I did the squeeze the bottle while trying not to blow the line off method.

 

[Arc]

I've done that! Works pretty well. Somehow I always make a mess.

The wife will not let me use the washer when she smells gear oil and friction modifier. Those clothes have to go in the garbage.

 

[buck91]

Looks good. I've been using one of those $15 12v extraction pumps on my last couple jobs and really like it.

https://www.amazon.com/Extractor-Upgraded-Transfer-Scavenge-Motorbike/dp/B0C7VXWJHP/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.3afbfb03-37f9-433d-812b-5618f5fce9ff:amzn1.sym.3afbfb03-37f9-433d-812b-5618f5fce9ff&crid=1DWQCDY7ULWD5&cv_ct_cx=12v+oil+pump&keywords=12v+oil+pump&pd_rd_i=B0C7VXWJHP&pd_rd_r=bc6d3f22-46f8-4373-99fe-d6d7fd025cb8&pd_rd_w=LYGLC&pd_rd_wg=sJg3H&pf_rd_p=3afbfb03-37f9-433d-812b-5618f5fce9ff&pf_rd_r=EGAB8FBAFRKFAZJ53434&qid=1753981315&sbo=RZvfv//HxDF+O5021pAnSA==&sprefix=12v+oil+pump,aps,252&sr=1-3-6024b2a3-78e4-4fed-8fed-e1613be3bcce-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1

Worth noting I haven't tried it with true gear oil, but it pumps motor oil and hydraulic fluid just fine.

Always been tempted by this, never bought one though