Husqvarna oil filter

Status
Not open for further replies.
depending on length, a short kohler is 12-050-01s, and the longer is 52-050-02s, you can cross these numbers @ any autoparts place, forget the dashes and s, also if unsure if its short or long, just get short, no worries, i just got an stp @ autozone for my neighbor, but i forget the num
 
Blumurder,

I have a Cub Cadet with the Kohler 20 hp Courage engine. If your's is the same as mine, Super Tech 3614, Fram PH3614 or any cross-referenced brand should work. I've got a Super Tech 3614 on mine right now. It's certainly a lot cheaper than buying a Kohler filter. Good luck.
 
Last edited by a moderator:
If this is in regards to the 20hp Kohler Courage SINGLE cylinder, you've got to stick with the ST3614 like said (or shorter).

If it's a Courage 20hp V-twin, the sky is the limit. Same filter options and orientation as the Command V-twins. I run ST3600 / FL400's on mine. Some coffee can PH8A's can even be used (a bit over the top though).

Joel
 
Originally Posted By: JTK
If this is in regards to the 20hp Kohler Courage SINGLE cylinder, you've got to stick with the ST3614 like said (or shorter).

If it's a Courage 20hp V-twin, the sky is the limit. Same filter options and orientation as the Command V-twins. I run ST3600 / FL400's on mine. Some coffee can PH8A's can even be used (a bit over the top though).

Joel
It's the single cylinder
 
According to wixfilters.com, the Wix xref to the FL910 is 3.4" tall. I'd *assume* that would fit:
FL910
 
Status
Not open for further replies.
Back
Top Bottom