On the truck, minor leak from the plug going into the larger piece of the assembly.
Funny it didn't leak from the main part that was pressed against the pan considering I put the gasket on the inside not the outside. I am redoing it right now, was told by a Ford transmission builder not to use RTV anywhere. Also read that Teflon was bad. I put an aluminum crush washer on the inside and the outside. Most likely will leak from the small bolt/plug that goes inside again.
Although the magnet was fairly clean, the slightest floating shiny specks in the fluid I drained. It is only 4 quarts, so I'm changing that and the filter since I have one even though it only has 5000 miles.