Godspeed MonoSS Coilovers

Godspeed is cheap quality coilovers like the low-end Tein, KSport, and BC Racing. It'll definitely be stiffer but not comparable in ride quality compared to say, if Bilstein or KW made a setup for the car. You do not have many options to start off with though so this may be one of the few coilover kits even available.
 
Last edited:
Godspeed is cheap quality coilovers like the low-end Tein, KSport, and BC Racing. It'll definitely be stiffer but not comparable in ride quality compared to say, if Bilstein or KW made a setup for the car. You do not have many options to start off with though so this may be one of the few coilover kits even available.
I know, that seems to be the problem. Like I said, I would be more than happy to just get some better name performance oriented dampers, but there doesn't seem to be much out there.
 
I am installing an even cheaper brand than godspeed right now. Only have the fronts on and driven about 2 weeks but its a big improvement over 15 year old oem shocks. The highest they can get is 1" below stock. I feel like i got a lot for what i paid.
 
I own a set and am familiar with them. Heres the deal. For a daily driver lowered set up, they are perfectly fine. Most of the info you find online are from people that have never owned them. They trash talk them because of the price point and where they are manufactured. They are built to a price point and you need to know that, but you get alot for the cost. Like any aftermarket suspension modification there is give and take. The give: they give a more “sporty” feel when driving. They are a mono shock, they are stiffer then a twin tube. These shocks have non vehicle specific valving. They are valved according to the spring weight and there is no real world testing put into them, but thats pretty much the same story with all coilovers in the sub 2k dollar range. They give alot of bang for your buck. They will make your vehicle handle differently than stock. When i put them on my Rio it transformed into something much better than stock. Body roll and brake dip was completely eliminated. The secret to these things as with any coilover set up is in setting the preload appropriately. Set it to 10mm and then wait for them to settle and go from there. They do loosen up a little after break in. Pre load is key. Most of the kids you see online talking about the crazy bumpy coilover ride are running springs that are way too stiff for the chassis, or they have the preload set incorrectly, or they have slammed the car to the point where bumpsteer and roll center are completely out of control causing the car to ride and drive like trash. At that point they blame the coilovers and dub them as “junk” saying things like “oh if they not KW they will ride like garbage”. Well i can tell you from experience that Kw’s slammed on certain chassis will knock the fillings out of your teeth. Handles like on rails but way too ruff to daily. Most coilover problems, even with the uber cheap ones is generally installer error. Remember that preload is key. So now the take: the finish on the springs and shocks is pretty bottom of the bucket. They will have some knicks and chips in the finish when they show up, but thats going to be with pretty much all of them now adays with out getting into the Uber high end stuff. If you live in an area where they salt the roads, forget about it. They will go to crap quick. I live in the south and keep mine sprayed down with fluid film. It helps alot, but i can tell that the finish will show wear much quicker than a high dollar set up. Another area where these fall short is in their adjustment. They are not super adjustable. You can most certainly feel the difference from “hard” to “soft” but single click adjustments are hard to feel. I keep them set middle of the road and it works for me, so i just set it and forget it. Over all man i personally feel like they are a great set up on a budget. I have had no problems with mine in the last year and am thus far happy with my purchase. I have ridden on most all of the high end and low end adjustable set ups, and for a daily driver these are perfectly fine. The low end coilovers get ragged on line unjustly alot of the time due to fan boi’s and back yard installer error.
 
I own a set and am familiar with them. Heres the deal. For a daily driver lowered set up, they are perfectly fine. Most of the info you find online are from people that have never owned them. They trash talk them because of the price point and where they are manufactured. They are built to a price point and you need to know that, but you get alot for the cost. Like any aftermarket suspension modification there is give and take. The give: they give a more “sporty” feel when driving. They are a mono shock, they are stiffer then a twin tube. These shocks have non vehicle specific valving. They are valved according to the spring weight and there is no real world testing put into them, but thats pretty much the same story with all coilovers in the sub 2k dollar range. They give alot of bang for your buck. They will make your vehicle handle differently than stock. When i put them on my Rio it transformed into something much better than stock. Body roll and brake dip was completely eliminated. The secret to these things as with any coilover set up is in setting the preload appropriately. Set it to 10mm and then wait for them to settle and go from there. They do loosen up a little after break in. Pre load is key. Most of the kids you see online talking about the crazy bumpy coilover ride are running springs that are way too stiff for the chassis, or they have the preload set incorrectly, or they have slammed the car to the point where bumpsteer and roll center are completely out of control causing the car to ride and drive like trash. At that point they blame the coilovers and dub them as “junk” saying things like “oh if they not KW they will ride like garbage”. Well i can tell you from experience that Kw’s slammed on certain chassis will knock the fillings out of your teeth. Handles like on rails but way too ruff to daily. Most coilover problems, even with the uber cheap ones is generally installer error. Remember that preload is key. So now the take: the finish on the springs and shocks is pretty bottom of the bucket. They will have some knicks and chips in the finish when they show up, but thats going to be with pretty much all of them now adays with out getting into the Uber high end stuff. If you live in an area where they salt the roads, forget about it. They will go to crap quick. I live in the south and keep mine sprayed down with fluid film. It helps alot, but i can tell that the finish will show wear much quicker than a high dollar set up. Another area where these fall short is in their adjustment. They are not super adjustable. You can most certainly feel the difference from “hard” to “soft” but single click adjustments are hard to feel. I keep them set middle of the road and it works for me, so i just set it and forget it. Over all man i personally feel like they are a great set up on a budget. I have had no problems with mine in the last year and am thus far happy with my purchase. I have ridden on most all of the high end and low end adjustable set ups, and for a daily driver these are perfectly fine. The low end coilovers get ragged on line unjustly alot of the time due to fan boi’s and back yard installer error.

Thank you, that is about what I am expecting. I had separate lowering springs and KYB adjustable shocks on my Fiat 500 Abarth that I got dialed in quite well. I also had a similar brand of less expensive coilovers on my Miata that I was able to get dialed in really well also. I am leaning more and more in this direction.
 
I had a set of lower-end BC racing coilovers. It road pretty decent but I was not going for the slammed look or anything. I wanted an even lowered look that can only be done by coilovers. H&R or Eibach lowered the car more in the rear than the front for my car.

Main thing I noticed with BC racing was the rust. They were prone to it. Not sure of other brands are the same. Also I can tell you Megan Racing and BC racing were almost identical expect for color for my Infiniti.
 
I had a set of lower-end BC racing coilovers. It road pretty decent but I was not going for the slammed look or anything. I wanted an even lowered look that can only be done by coilovers. H&R or Eibach lowered the car more in the rear than the front for my car.

Main thing I noticed with BC racing was the rust. They were prone to it. Not sure of other brands are the same. Also I can tell you Megan Racing and BC racing were almost identical expect for color for my Infiniti.

From what I can gather, BC racings budget stuff(BR series) is about the same as other chinese made budget/mid range stuff, but offers custom spring rates/valving and will rebuild them to your specs? And has better marketing?

I've been perusing suspension equipment for a drift/track build im cooking up but you cannot trust drifters or E46/36 people for advice on building a car right.
 
I had a set of lower-end BC racing coilovers. It road pretty decent but I was not going for the slammed look or anything. I wanted an even lowered look that can only be done by coilovers. H&R or Eibach lowered the car more in the rear than the front for my car.

Main thing I noticed with BC racing was the rust. They were prone to it. Not sure of other brands are the same. Also I can tell you Megan Racing and BC racing were almost identical expect for color for my Infiniti.
You have to get up into the 2 grand range in order to escape the issues with the finish. All of the low and mid grade Chinese and Taiwanese coilovers suffer from the rapidly failing finish.
 
Well, I went ahead on ordered a set...I'll keep everyone posted. I will be coating them in the fall with oil to help with Iowa winters.
 
Interested in your review. Please make sure to update. POST PICTURES! Remember that the preload is key otherwise you will have problems with noises and ride. Is it a divorced set up for the rear on your car? I had to goole image to see what the car looked like. I work in the car business and i have never even seen one. It will look cool for sure.
 
I just read up top and saw that you really dont want to lower it much if any. Be aware that these may or may not drop the car even at the highest setting. My rio was 1” lower front and 1.5” lower in rear set at the highest settings.
 
Back
Top Bottom