Full OPH253 Cut Open, Unknown Mileage/Interval

Status
Not open for further replies.
Joined
Aug 5, 2015
Messages
1,115
Location
BC Canada
Pulled this one off of the '96 Jeep Grand Cherokee 4.0L that was in the shop. Obviously this is the wrong filter. Not sure when was the last OCI was done, Oil change sticker said 108K KM, August 10. Could of been sometime back in 2010?

Put Pennzoil Conventional 10w30 in with a Hastings LF115 equal to PH8A, which is a larger PH16 filter.

I don't know how all that sludge got into the bypass side of the filter. Very close to tearing though.

ZTCjqRk.jpg

8QYpxm2.jpg

05xBlaG.jpg

nbPvBxC.jpg

OA7FNK1.jpg

3vLWVyL.jpg

nf01id4.jpg
 
Originally Posted By: jhellwig
It was deffinatley full. Looks good except for the gunk in the tube.


Its those louvers on the filters that are causing this trouble.
wink.gif
 
Originally Posted By: Farmer

I don't know how all that sludge got into the bypass side of the filter. Very close to tearing though.


Apparent that sludge/grit got through the bypass valve at some point. Not other way for it to get through unless there was a tear in the media somewhere.
 
Originally Posted By: car51
Looks good and got the job done:). Thanks for the C&P sir


No thank you for your C&Ps. You post way more C&Ps than me.

Thanks for the clarification ZeeOSix
 
Farmer - what's the orientation of that filter on the Jeep? If it's somewhat base up, then that could also explain why the crud is down on the bypass valve in the dome end.
 
Originally Posted By: ZeeOSix
Farmer - what's the orientation of that filter on the Jeep? If it's somewhat base up, then that could also explain why the crud is down on the bypass valve in the dome end.
A '96 Jeep 4.0L has the oil filter horizontally.
 
Originally Posted By: Run
L14670 is the same as a PH16


I guess you can call that a filter...
laugh.gif


Just kidding, I don't really know Purolator filter numbers. Thanks for the clarification.
 
Status
Not open for further replies.
Back
Top Bottom