How many properly maintained engines have you worn out?I'll pay the extra money of the Titanium if it helps the longevity of the engine .
How many properly maintained engines have you worn out?I'll pay the extra money of the Titanium if it helps the longevity of the engine .
How many properly maintained engines have you worn out?
I have buy for at $8.97 or below there will not buy PH fram garabage I will $ 2 more get better filter than fram ph with cardboard . I agree $14 for titanium oil filter it self is not worth maybe will oil change bundles will get fram titanium ok deal then mobil 1 or carquest oil filter.
One would be better served by posting about topics you know about rather than things you don’t.i think the wire mesh thing was always a bit of a gimmick. fibreglass media with a steel inner tube won't collapse and break. The bypass will open long before a big enough pressure differential can build up to tear the media.
Fiberglass media needs a backing, the steel inner tube however is mostly extraneous when you have wire backed media.i think the wire mesh thing was always a bit of a gimmick. fibreglass media with a steel inner tube won't collapse and break. The bypass will open long before a big enough pressure differential can build up to tear the media.
do you have pictures of this torn fiberglass media? there are plenty of cut open youtube vids. maybe you can post a link to one. I've never seen it.One would be better served by posting about topics you know about rather than things you don’t.
Fiberglass has no structure you need some form of backing.do you have pictures of this torn fiberglass media? there are plenty of cut open youtube vids. maybe you can post a link to one. I've never seen it.
Which filters with fully synthetic media are you referring to? The ones without the backing.do you have pictures of this torn fiberglass media? there are plenty of cut open youtube vids. maybe you can post a link to one. I've never seen it.
You've never seen it, yet you make conclusions that it didn't need a wire backing?do you have pictures of this torn fiberglass media? there are plenty of cut open youtube vids. maybe you can post a link to one. I've never seen it.
Still need a center tube, unless the wire backing was very thick wire and very ridged, which it typically isn't because it's there to mainly keep the pleats from folding over from the oil flow forces. If the center tube was removed, the whole wire backed media assembly would be pushed inward and become too deformed.Fiberglass media needs a backing, the steel inner tube however is mostly extraneous when you have wire backed media.
Yup. And of course it also provides the integrity for the cartridge itself so it can seal against the baseplate under pressure and the bypass valve at the bottom, if it's a separate unit.Still need a center tube, unless the wire backing was very thick wire and very ridged, which it typically isn't because it's there to mainly keep the pleats from folding over from the oil flow forces. If the center tube was removed, the whole wire backed media assembly would be pushed inward and become too deformed.
Fram titanium does still have the metal backing. Purchased today. Glad it goes.