DIY Arcade build - Power socket help

[Urshurak776]

HI all,

I'm building an arcade cabinet (bar top) for our upstairs loft and have a question.

The switched power socket is common (I have a few already) but there is a round bezel on it as can be seen in the photo. I am not having any luck sourcing that. Since I bought a flat pack cabinet, the round hole is already cut. I sent a note to the seller but haven't heard back.

Any idea where I can get that round bezel?

Thanks!

 

[Owen Lucas]

Reminds me of this:

https://www.lowes.com/pd/Hillman-2-in-Plastic-Desk-Grommet/1000898166?cm_mmc=shp-_-c-_-prd-_-elc-_-ggl-_-LIA_ELC_106_Tools-Wire-Connectors-_-1000898166-_-local-_-0-_-0&ds_rl=1286981&gclid=Cj0KCQjw4uaUBhC8ARIsANUuDjVcm47mW9qkC8ktraI6YbG8jTV7SVJZMaEUqeUvGM6Ngc0jYWCcsrgaAohMEALw_wcB&gclsrc=aw.ds

 

[mk378]

Yes those are common on office furniture which has round holes to drop cables through. Should be able to find a blank one and cut out the inside.

 

[Urshurak776]

Thanks! Ironically, he replied and said he gets them at Lowes in the cable management aisle. You guys are spot on!

Appreciate it!