This analysis is for my 2000 Accord SE (2.3L 4 cyl) with 35,000 miles on the car and 5,033 miles on the oil for this analysis. This was the 2nd oil change with the Chevron SL 10W 30 oil. Blackstone screwed up and thought it was only 2,033 miles instead of 5,033 so their comments on extended intervals are pretty much irrelevant. Blackstone did indicate that "the wear levels are quite low, easily beating averages. We don't think you will have any problem going 5,000 miles)." I would appreciate comments from all of you:
Aluminum 2
Chromium 1
Iron 7
Copper 6
Lead 7
Tin 0
Moly 14
Nickel 0
Manganese 0
Silver 0
Titanium 0
Potassium 2
Boron 11
Silicon 8
Sodium 3
Calcium 1818
Magnesium 11
Phosphorous 763
Zinc 992
Barium 0
SUS Viscosity @ 210 degrees 59.8
Flashpoint 380
Fuel % Antifreeze % 0
Insolubles % 0.5
TBN of 2.5
Aluminum 2
Chromium 1
Iron 7
Copper 6
Lead 7
Tin 0
Moly 14
Nickel 0
Manganese 0
Silver 0
Titanium 0
Potassium 2
Boron 11
Silicon 8
Sodium 3
Calcium 1818
Magnesium 11
Phosphorous 763
Zinc 992
Barium 0
SUS Viscosity @ 210 degrees 59.8
Flashpoint 380
Fuel % Antifreeze % 0
Insolubles % 0.5
TBN of 2.5