Bosch ABS Module, 1999 Passat

[ET16]

I need a Bosch 5.3 ABS module for a 1999 VW Passat. I can get a used one for about $150 or a rebuilt one for about $190 from Xemodex, which is supposed to be improved. I could have the one I have repaired, but I don't really want to wait the 3-4 day turnaround.

Any suggestions?

 

[Rhymingmechanic]

I had a Chevy ABS module repaired by ModuleMaster in Idaho. Cost was between $100 and $200, while a new module was around $1000.

I can't remember whether I drove the truck or let it sit, but the turnaround time wasn't a problem for me. The repair/upgrade has lasted 5.5 years so far, while the original part failed at 5 years.

It looks like they will repair yours for $160.
http://www.modulemaster.com/en/abs/bosch53.php

 

[JHZR2]

I rebuilt the ABS on my 91 318i. Used scrapper parts and they all worked fine. Not sure what kinds of improvements could be done, higher sampling rates?

 

[artificialist]

I'd rather buy the rebuilt one. I have never seen a junkyard that could test a used ABS module to see if it functions correctly.

 

[ET16]

I think I'll go with the rebuilt one. Thanks.

 

[UG_Passat]

hopefully you have a vag-com.... you'll need it to properly bleed the abs pump

 

[ET16]

Originally Posted By: UG_Passat
hopefully you have a vag-com.... you'll need it to properly bleed the abs pump


Even if I only take off the electricals?

 

[Dinosaur]

No need to bleed in this case. Although I second on the module masters.