MolaKule
Staff member
@ZeeOSix
@ArthurArgentum
Suggestion: Do your calcs for both the mid-stream flow rate in m/s and Volumetric Flow rate in m3/s or Mass Flow Rate in kg/s for two kinematic viscosities--7.0cSt and 19cSt. You can also assume rho ρ = 891 kg/m3 or use your own oil density figures.
Assume an initial pool of oil contained in a volume of 5,202mm3, or 51mm in Height and 102mm square. (Visualize a funnel with a square top and circular tube, if you will).
Assume Laminar flow (Re
The length of the oil hole tube (drain back orifice tube) is 458mm.
@ArthurArgentum
Suggestion: Do your calcs for both the mid-stream flow rate in m/s and Volumetric Flow rate in m3/s or Mass Flow Rate in kg/s for two kinematic viscosities--7.0cSt and 19cSt. You can also assume rho ρ = 891 kg/m3 or use your own oil density figures.
Assume an initial pool of oil contained in a volume of 5,202mm3, or 51mm in Height and 102mm square. (Visualize a funnel with a square top and circular tube, if you will).
Assume Laminar flow (Re
The length of the oil hole tube (drain back orifice tube) is 458mm.
Last edited: