My 2010 did not have it. I thought they started on the 4th generation?Starting with 2010 model year.
Otherwise, good post!
My 2010 did not have it. I thought they started on the 4th generation?Starting with 2010 model year.
Otherwise, good post!
All of the 3rd gen Prius have it.My 2010 did not have it. I thought they started on the 4th generation?
Hmm, looking at ToyoDIY you appear to be correct. I didn't remember seeing it when I did the head gasket a couple years ago.All of the 3rd gen Prius have it.
True and let’s not forget that crankcase speeds time in vacuumI apologize, I misunderstood your stance on this. I’m shocked that anyone would say that water doesn’t evaporate until it reaches 212. Basic logic shows that to be wrong
phev looks attractiveMoisture in the oil is definitely happening in my 2024 Prius plug in hybrid. I can see mayo emulsion under the oil fill cap in winter months. I try to ensure that the engine runs long enough to heat up when it starts and longer trips also help to reduce the emulsion.
I don’t know if the moisture will result in any significant wear issues. I’m currently using 0W16. The engine doesn’t run much - a tank of gas typically lasts me 2 to 3 months (2000 to 3000 miles).
Not wrong in cool conditions. But I’ve seen water temperatures over 200. I used to have the gauge up all the time but became kind of boring. Easy cruising doesn’t use much power or make much heat.My new TX500h hovers around 190f under most conditions, even on long highway drives. I think I have seen it hit 200F once.
I haven't monitored our RX350h very closely but judging by how cool the oil is after a long drive, I doubt it's much different.
If some hybrids are moving continuously at speeds above about 40 mph on level terrain, the engine runs continuously. In that case, why shouldn't the oil temperature be nearly the same as in a nonhybrid under the same conditions?You know, I really don't think that a hybrid inflicts any more demands upon its oil than does an ICE that is only short tripped. Neither will ever reach high enough oil temperatures for long enough to evaporate any entrained moisture.
Just because the engine isn't burning as much gas, generally. Most hybrids (not all but most) have a more efficient atkinson-cycle engine that's engineered for peak MPG rather than performance. Some non-hybrids have atkinson or part-time atkinson engines though and they just get a bit better MPG. (And if you burn less gas to travel at the same speed, you will reduce the size of the heat load for the radiator to shed.)If some hybrids are moving continuously at speeds above about 40 mph on level terrain, the engine runs continuously. In that case, why shouldn't the oil temperature be nearly the same as in a nonhybrid under the same conditions?