11' Lincoln Navigator with air suspension in rear

[Carburetor1]

Does anyone know the proper rear ride height measurements from center cap to fender in relation to the front?

 

[SatinSilver]

@GON may know.

 

[GON]

@GON may know.

Sorry, I don't know the answer. This forum likely has ample active members that can help (I know it said expedition- navigator is included):

https://www.expeditionforum.com/forums/3rd-gen-2007-2017.40/

 

[bdcardinal]

Navigator with rear air suspension

99 mm (3.897 in) ± 8 mm (0.314 in)

Rear Ride Height Measurement

Item​	Description​
1	Ride height = 2 - 3
2	Measurement 2
3	Measurement 3

NOTE: Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.

1. Measure the distance between the flat level surface and the center of the lower arm rearward bolt (measurement 2).

1. Measure the distance between the flat level surface and the center of the shock absorber lower bolt (rearward side) (measurement 3).

1. Subtract measurement 3 from measurement 2 to obtain the rear ride height.
   • For additional information, refer to Specifications in this section.

 

[Carburetor1]

Ok thanks.. so just to clarify this I want to have about 4 inches equally on both sides? The minimum ground clearance for the vehicle is 9". Is that what I want to aim for or am I way off

 

[bdcardinal]

Ok thanks.. so just to clarify this I want to have about 4 inches equally on both sides? The minimum ground clearance for the vehicle is 9". Is that what I want to aim for or am I way off

Shoot me your email and I can send you the entire section from the FSM.

 

[Carburetor1]

Shoot me your email and I can send you the entire section from the FSM.

Sent a message

 

[Carburetor1]

Any idea how I can find the torque specs for the front suspension?

 

[bdcardinal]

2wd or 4wd? They could be the same but the FSM has them in different sections.

 

[slacktide_bitog]

NOBODY knows to how to make reliable air suspension, so most people just convert to coils

 

[Carburetor1]

2wd or 4wd? They could be the same but the FSM has them in different sections.

4wd.. the front is coil springs. I'm looking for specs on control arms and sway bar etc...for the front

 

[bdcardinal]

4wd.. the front is coil springs. I'm looking for specs on control arms and sway bar etc...for the front

Check your email