- Joined
- Feb 7, 2022
- Messages
- 121
Does anyone know the proper rear ride height measurements from center cap to fender in relation to the front?
Sorry, I don't know the answer. This forum likely has ample active members that can help (I know it said expedition- navigator is included):@GON may know.
Navigator with rear air suspension | 99 mm (3.897 in) ± 8 mm (0.314 in) |
Item | Description |
---|---|
1 | Ride height = 2 - 3 |
2 | Measurement 2 |
3 | Measurement 3 |
Shoot me your email and I can send you the entire section from the FSM.Ok thanks.. so just to clarify this I want to have about 4 inches equally on both sides? The minimum ground clearance for the vehicle is 9". Is that what I want to aim for or am I way off
Sent a messageShoot me your email and I can send you the entire section from the FSM.
4wd.. the front is coil springs. I'm looking for specs on control arms and sway bar etc...for the front2wd or 4wd? They could be the same but the FSM has them in different sections.
Check your email4wd.. the front is coil springs. I'm looking for specs on control arms and sway bar etc...for the front