Search results

My old boss would destroy phillips screwdrivers including snap-on. The ones that held up the best were Mac screwdrivers

I was never one for saw horses. But after seeing these that my carpenter buddy had. I had to have them. They are pricey but fold up and are very ridged. you can use a 2x4 for the top piece and the top can be sacrificial. and if you want to make it taller use a 2x12...

A bottle of STP to a gallon of oil.

Put a set of headers on it. I did that with a 250 and boy did it open some power.

My John Deere chain saw requires 20-1. ( it's 45 years old ) The mix I do, winds up being 16-1. 8 oz of oil to a gallon of gas. I've have run my Stihl weed whipper ( 40-1 ) for a dozen years or so on the 16-1, runs fine. I've just bought a Husqvarna leaf blower and I'm running that on the 16-1...

a bottle of STP to 100oz of whatever oil is what I use. 100oz is the size of the laundry detergent bottle that I use. Been running this for over 40 years on the same bar.

My old John Deere chainsaw takes 20-1. Because of that Mixing the fuel is easy 8oz of oil to a gallon of ne gas. Consequently my 40-1 and 50-1 two strokes get the same fuel

I use the standard STP oil additive in a 15 ounce bottle and add it to 100 ounce of what ever oil I have. It's worked for me for over 40 years.

Try Totally Awesome. A quart of it at the dollar store is now $1.25 It really cuts grease.

visegrips

I have the same splitter. my catcher is on the opposite side from the valve handle. Well worth the investment. A picaroon is another good investment.

I can attest to the IR pumps being junk. I have the 60 gallon SS5. it's a terrible unit. and they still sell it!

If the handle can come off on one side, I would get a piece of tubing and slide it over the handle. Fill it with glue. If the handle can't come off, slot a piece of copper pipe and slide it over and glue it.

A book by Doug Roe is the book for the rochester carbs. He worked for GM at their proving grounds location. I have one of the last of the carbed 454 engines in my motorhome ( 1989 ). With a rebuild on the carb and a recurve on the distributor and headers, it's a beast.

Blow air back into the pump?

Do you have a front load. washing machine? If so try using 1/2 of the amount laundry detergent. Too much detergent in those front loaders will cause bacteria to build up in the drain pipe from the machine. It will cause a nasty sewer smell.

Originally Posted by Quattro Pete Originally Posted by dirtymudder here is a block diagram of the amp. amp diagram The output uses a STK package output STK-433 These used to be notorious for shorting out. What happens is when they short out, straight power supply voltage goes to the speakers...

I guess you will have to down load the manual yourself. Maybe try this https://elektrotanya.com/yamaha_rx-v471_htr-4064.pdf/download.html#dl

It's on page 71

here is a block diagram of the amp. amp diagram The output uses a STK package output STK-433 These used to be notorious for shorting out. What happens is when they short out, straight power supply voltage goes to the speakers. when that happens a protection relay kicks out to keep the output...