hi guys,
i allready opened this thread a while ago but i just finished building and installing the engine and now its oil time ,
i'v built a honda d16 engine which suppose to produce around 400hp with a t3/4 turbo, forged pistons and rods. compression ratio is around 1:8.5 very agressive aftermarket cam /spring/valves/retiners
ACL bearings.
main and rod clearances are .0015 all around.
bigger buffled oil pan 5.5L insted a oem 3.3L
i'm looking for a mineral oil low detergent high zddp as i was told??? maby 10-40(unless i'm mistaken???) and move to syntetic after break in,?
just for the record i live in a hot country, were seeing around 27-35c at summer and around 10-20c at winter.
i dont have alot of oil brand options, just the big stuff. castrol, valvoline, silkolene, motul, mobil1, elf, red line,
agip
please help me decide.apl? mineral? syntetic? low detergent? which weight? i'm exhausted
thanks alot
i allready opened this thread a while ago but i just finished building and installing the engine and now its oil time ,
i'v built a honda d16 engine which suppose to produce around 400hp with a t3/4 turbo, forged pistons and rods. compression ratio is around 1:8.5 very agressive aftermarket cam /spring/valves/retiners
ACL bearings.
main and rod clearances are .0015 all around.
bigger buffled oil pan 5.5L insted a oem 3.3L
i'm looking for a mineral oil low detergent high zddp as i was told??? maby 10-40(unless i'm mistaken???) and move to syntetic after break in,?
just for the record i live in a hot country, were seeing around 27-35c at summer and around 10-20c at winter.
i dont have alot of oil brand options, just the big stuff. castrol, valvoline, silkolene, motul, mobil1, elf, red line,
agip
please help me decide.apl? mineral? syntetic? low detergent? which weight? i'm exhausted
thanks alot
Last edited: