I am making a single remote system for a 1998 Accord 2.3L, and the current plan is to install a T between the block and the oil pressure switch, and then dump back through the valve cover (It is easier to remove than the oil pan, and I want to take it off for other reasons already). I plan to use a typical remote filter mount (with a properly sized orifice on the return side of course), and 3/4"-16 is the nipple thread size that I am very typically seeing on the products that I want. Because I am planning to use the Amsoil EaBP filters, I will need 1"-16 threads. After putting in a lot of time trying to find an adapter nipple, I am reach out to this BB for some help. Does anyone know where I can find one?
Also, I am seeking advice regarding a differential pressure gauge. I have an idea about involving a dual in, dual out filter mount, and utilizing the two extra ports as connection points for the D.P. gauge, but will likely involve multiple connection/adapter points and I have to imagine there's something simpler out there. Your advice is welcome!
Thanks! - Ryan
Also, I am seeking advice regarding a differential pressure gauge. I have an idea about involving a dual in, dual out filter mount, and utilizing the two extra ports as connection points for the D.P. gauge, but will likely involve multiple connection/adapter points and I have to imagine there's something simpler out there. Your advice is welcome!
Thanks! - Ryan