BMW Dom
Thread starter
- Joined
- Oct 6, 2020
- Messages
- 2,412
Yeah, I have Bimmerlink. Also have Inpa and istaYou'll need a decent small torque wrench as the pan bolts are only 8NM for the ZF trans and 10NM for the GM trans. (we're talking 7 to 9 ft-lbs here).
Also a cooking thermometer will work for taking the fluid temp at the fill plug hole. I use an infrared thermometer on the X3 because I have the GM with metal pan (and for the MB). I use the meat thermometer on #1 girl's 2008 328i with the ZF plastic pan.
The temp isn't all that difficult or critical as it's a wide range of 30C to 50C.