What is this car

[GaryMX5]

those little Chevy V8's were screamers and can easily make 350-360hp with complementary torque figures.

It was pretty easy and not very expensive to get those little things to rev well over 6K rpm and as you said.....scream so beautifully doing so.

 

[JohnnyG]

And Chevy stuck with that woeful (but reliable) transmission for a Looong time. It was especially bad in my part of Pennsylvania, Susquehanna County. Going uphill would have been a lot better with a third gear.

And yet they are still made and in demand for the dragstrip. Go figure.

 

[fdcg27]

I remember back in the day, that while many guys tricked out the Chevy II, they found it wasn't the best car for it, as the unibody construction wasn't rigid enough to take a lot of power. Does that sound familiar to others of you that are old enough to remember?

These cars did have front sub-frames and there are today numerous options for upgrading them.
Not sure what Chevy changed for the second gen Nova, but those cars were available with big blocks and also supplied the chassis of the Camaro.
A big weakness of the stock cars were the monoleaf rear springs.

 

[Urshurak776]

AI answered - right click and choose "search this image with Google Lens"
Then copy/paste the answer into a post.

Yup

 

[JeffKeryk]

Beautiful car. Love the points on the '63 cars. Ralleys came in in '67. That's a car I would build!

 

[Silverado12]

That's a nice original VW Passat.

 

[Chris142]

Early nova. You could get it with a 4 cylinder and 3 on the tree.

 

[CleanSump]

These cars did have front sub-frames and there are today numerous options for upgrading them.

Yes. The subframe held the front suspension and engine mounts and ended just past the firewall. I always thought it was weird.

 

[fdcg27]

Yes. The subframe held the front suspension and engine mounts and ended just past the firewall. I always thought it was weird.

Just like modern FWD cars?
The subframe was noted by some as creating a hinge point in the Camaro.

 

[CleanSump]

Just like modern FWD cars?
The subframe was noted by some as creating a hinge point in the Camaro.

Not really like the unibody of today. This was like they made a traditional steel frame and took a sawzall and removed the back 3/4 of it.