9's? We're all about 1's and 0's here
Don't ask about my double conversion UPS's, standby generator, backup generator and backup-backup generator, and my backup-backup-backup Ecoflows
What are you working on today?
- Thread starter Amkeer
- Start date
9's? We're all about 1's and 0's here
Don't ask about my double conversion UPS's, standby generator, backup generator and backup-backup generator, and my backup-backup-backup Ecoflows
What oil filter you install on your two carts? Looks like PENTIUS one Glenda W posted. Thank You sir
ls1mike
$50 Site Donor 2025
Alternator on the 2005 Ford 500. Still runs nice and quiet. 208,000. Was the original alternator.
More impressive is the CVT remaining ambulatory! These were CVT, no? I used to service an '05 Freestyle that was.
Oil change, 2018 F150 2.7. No drama. Cut the filter media to get a good look. In the bright light there are a number of the tiniest little sparkles. I doubt I could get a good photograph because it takes a lot of light and you only see them as they shimmer. Never looked this closely before at this vehicle, so I have no frame of reference. Never saw any in the Volvo I cared to examine. Feeling irritated but I’m sure it’s fine.
- Joined
- Mar 9, 2024
- Messages
- 167
Currently working my way through a bag of Ruffles all dressed potato chips.
Changed the oil on my son's Jeep Renegade. Noticed some weeping from the drain plug; reason was an old deteriorated rubber washer. Went to O'Reilly to get a new drain plug washer and more shop towels, only to get home and realize there was a hole in the drain plug washer package and no washer to be found. Went back to O'Reilly for a replacement and of course they had no more in stock. Did a return and got a new drain plug with washer. It's always something.
Yup, Pentius PLXL7317, good eye sir.
Today transported Lil Chooch to the ranch, built some wood walls and tripled its capacity. Its rated for 3000lbs. I'm sure it can haul 1000 durians to market, but 3000lbs? The rear axle is very beefy. We will see.
First official delivery.
Very good sir. I Thank You.
ls1mike
$50 Site Donor 2025
Roofing experts, roast me. A few posts ago I put the dish up the cable gland came today
Thats bishop tape over the screws, with roofing cement under/around
Thats bishop tape over the screws, with roofing cement under/around
Last week a neighbor asked me if I could somehow fix the door hinges on his very old tractor. They would cost him $500 plus are hard to change.
After looking at it, and taking some measurements, I told him to buy brass bushings in the size i wrote down.
I drilled the hinges, and pressed in the bushings.
Then i took two over sized bolts, and turned them on the lathe till they fit nicely, then cut new threads on them, and double nutted them.
After looking at it, and taking some measurements, I told him to buy brass bushings in the size i wrote down.
I drilled the hinges, and pressed in the bushings.
Then i took two over sized bolts, and turned them on the lathe till they fit nicely, then cut new threads on them, and double nutted them.
New clock spring on the '15 Forester to regain the horn. I bought one on ebay for $24 shipped.
My little Xtool seemingly would have been able to recalibrate the angle
but it was at zero before and after I started and live data values remained the same when I turned left or right
@slacktide_bitog
My little Xtool seemingly would have been able to recalibrate the angle
but it was at zero before and after I started and live data values remained the same when I turned left or right
@slacktide_bitog
09 Prius. Chinesium hub and OE CV boot kit.
Put the shell back on the Dakota with a new foam seal. Time to get back to work. With the shell off it’s nice to haul tall stuff but thats rare, locking stuff back there without disappearing is more useful. Need two trucks.. thinking a F350 for the new place 