Hello there ! If you alow me- here´s some input from Scandinavia and our polar climate...
In Sweden almost 50 percent of all cars are fitted with an electrical "engine heater". This is an electrical device mounted (mostly) in a frost plug and through this you can pre-heat the water in your radiator. At the same time most people also have a so called " cab-heater" (?) so you do not have to worry about ice/snow and a cold seat when starting up in the morning. Not to talk about avoiding scratches on your windows...Most people have this kit connected via a timer - so at approx 0 degrees Celcius you start pre-heating say 1 hour before you want to drive away. At-10C you need approx 1.5 hrs and at -20 and even lower temps. you need ca. 2 hrs preheating. By avoiding cold starts -especially in the winter- you cut down on fuel consumption,resulting in reduced carbon dioxide and hydrocarbon emissions. As we all know - most of the engine wear occurs at cold starts why this of course also is an important factor. Engineers sometimes classify a "cold start" as everything below approx 85 degr.C !
But the best thing of course is that you can start your engine at all - a frosty snowy morning with -30-35 C and maybe even colder temps...
These engine heaters are even more useful when talking about the new modern small diesel engines like the VW/Audi/Volvo/Peugeot and so on...since they are so efficient that it takes a very looong time before reaching normal working temperature - at extreme cold outside temperatures.
You need of course a parking space close to your house ( to get electricity ) so this is not an alternative if you live in a large city and park your car on the street.Most companies also provide electricity for their employees at the company parking (at work )via a pole ....
In Sweden almost 50 percent of all cars are fitted with an electrical "engine heater". This is an electrical device mounted (mostly) in a frost plug and through this you can pre-heat the water in your radiator. At the same time most people also have a so called " cab-heater" (?) so you do not have to worry about ice/snow and a cold seat when starting up in the morning. Not to talk about avoiding scratches on your windows...Most people have this kit connected via a timer - so at approx 0 degrees Celcius you start pre-heating say 1 hour before you want to drive away. At-10C you need approx 1.5 hrs and at -20 and even lower temps. you need ca. 2 hrs preheating. By avoiding cold starts -especially in the winter- you cut down on fuel consumption,resulting in reduced carbon dioxide and hydrocarbon emissions. As we all know - most of the engine wear occurs at cold starts why this of course also is an important factor. Engineers sometimes classify a "cold start" as everything below approx 85 degr.C !
But the best thing of course is that you can start your engine at all - a frosty snowy morning with -30-35 C and maybe even colder temps...
These engine heaters are even more useful when talking about the new modern small diesel engines like the VW/Audi/Volvo/Peugeot and so on...since they are so efficient that it takes a very looong time before reaching normal working temperature - at extreme cold outside temperatures.
You need of course a parking space close to your house ( to get electricity ) so this is not an alternative if you live in a large city and park your car on the street.Most companies also provide electricity for their employees at the company parking (at work )via a pole ....