valvoline maxlife = valve noise?

Status
Not open for further replies.
Joined
Jun 8, 2010
Messages
750
Location
oregon
i just changed my oil yesterday from mobil syn blend with a wix filter (which is the combo i ALWAYS use) to maxlife with a fram tough guard (since it was a combo price special at autozone) now i have some lifter noise, i used 5w30 like my dakota is suppose to have and my oil pressure gauge is sitting were it always does, so this doesn't make sense to me.
 
The tough guard has the same construction as the regular fram, the media is different.

I forget does the tough guard have a silicone adbv? If not that may be your problem. I put a Oreilly Fram clone on my Sierra and got lifter noise. I would switch to any other manufactuerer or a Xtended guard, and your problems should be gone.
 
it does have the silicone drain back valve, and the noise is always there, slightly more when cold but always there, it's not bad but it was'nt there before.
 
I tried it in my gf`s Olds 88 w/3800 V6 and it made the valvetrain tap only once it was good and hot. Cold engine operation was really smooth.
 
Originally Posted By: Vizzy
It's FRAM striking again.


well that was my concern when i bought it, i swore i'd never use fram anything but i've heard good tings about the tough gaurd so i figured what the hay. the only thing that makes me think it's not the filter is that i have great oil pressure, could it give good pressure but not enough volume?
 
i've also been looking through other treads on this site and have found several complaints about maxlife make engine noise.
 
If it was the filter you would only get the noise at start up. All oils get hammered for noise at times. I've seen Amsoil, PP, M1, Valvoline,etc get credit for noise.
 
Originally Posted By: mopar_monkey
Originally Posted By: Vizzy
It's FRAM striking again.


well that was my concern when i bought it, i swore i'd never use fram anything but i've heard good tings about the tough gaurd so i figured what the hay. the only thing that makes me think it's not the filter is that i have great oil pressure, could it give good pressure but not enough volume?


No, you heard good things about the xtended guard
48.gif


However, there is a possibility that the engine does not like the oil. Not all engines like every oil and it does not mean the oil is bad. I would swap the filter take it back to autozone and exchange it for a different brand or manufacturer. Or if your rich the xtended guard.

My truck was getting normal pressure with the oreilly fram, but 5 seconds of tick on start-up. Now if the noise is there even after the engine is hot then I probably would rule out the filter.
 
Last edited:
Originally Posted By: defektes
Originally Posted By: mopar_monkey
Originally Posted By: Vizzy
It's FRAM striking again.


well that was my concern when i bought it, i swore i'd never use fram anything but i've heard good tings about the tough gaurd so i figured what the hay. the only thing that makes me think it's not the filter is that i have great oil pressure, could it give good pressure but not enough volume?


No, you heard good things about the xtended guard
48.gif


However, there is a possibility that the engine does not like the oil. Not all engines like every oil and it does not mean the oil is bad. I would swap the filter take it back to autozone and exchange it for a different brand or manufacturer. Or if your rich the xtended guard.

My truck was getting normal pressure with the oreilly fram, but 5 seconds of tick on start-up. Now if the noise is there even after the engine is hot then I probably would rule out the filter.


probably true on the extended gaurd, i think i'll just go back to my previous combo, i've never had any issues with wix filters or mobil syn. blend, but now i'm out $20
frown.gif
 
Status
Not open for further replies.
Back
Top Bottom