@swampdodo Has anybody here used this (or had to use this) in their transfer case? If so, any difference notice[d] between this vs. regular transmission fluid or gear/diff oil?
Earlier Toyota Transfer Cases used a 75W90 GL-5 gear lube. Later transfer cases may be using a lower viscosity TC fluid.
The TCF in my 2012 Frontier 4X4 uses a 7.5 cSt ATF fluid similar to Dexron III or NissanMatic D.
The TCF in my 2015 PathFinder uses a 75W90 GL-5 gear lube.
Have your OEM fluid analyzed (VOA) before making a choice as to replacement fluids.
FWIW: Analysis for Valvoline Transfer Case Fluid:
Metal Inhibitor - 1ppm
Boron - 290ppm AW and FM
Silicon - 3, Anti-Foam
Sodium - 5ppm, Rust Inhibitor
Calcium - 300ppm, Detergent and FM
Magnesium, 1ppm, Dispersant
Phosphorus, 650ppm, EP
Zinc, 7ppm, Oxidation Inhibitor
Phenol+Amine Oxidation Inhibitor, 50ppm
Viscosity@100C - 6.05 cSt
Flashpoint, 410F
Brookfield Vis - 9,800
VII - polymethylacrylate