Transfer case, differential plugs

[Ndx]

Service manual say replace ...

Can I instead apply some of this ?


https://www.permatex.com/products/thread...raulic-sealant/

Thx

 

[HoosierJeeper]

I like to use plumber's tape.

 

[Ndx]

I was thinking about it ... But I'm afraid of cracked transfer case those plugs are tappered already I don't want to add thickness ... I know it's minimal but liquid seems a little bit safer

 

[oldhp]

Use Permatex 80632 Thread sealant. I've never had a leak/dip using this.

 

[Ndx]

I got 80632 but it has Teflon worried about contamination a little ..

 

[oldhp]

Don't get it on the bottom thread. Sleep well.

 

[jhellwig]

I don't use anything.

 

[demarpaint]

I wrapped mine with Teflon tape, and stayed away from the bottom of the threads.

 

[Snagglefoot]

I think it’s fairly important to clean off the buildup of Teflon tape and/or thread sealant, particularily on aluminum transfer cases and then re-apply a fresh coating. Make sure the drain plug on the transfer case has the integral magnet.

SF

 

[Trav]

You can use that or tape just don't over tighten it, snug and a hair will do it.

 

[supton]

Considering I have one that is stuck in place, and now stripped, I'm more of the mind to use nothing.

 

[ZebRuaj]

I never use anything. If it comes out easy, it hopefully goes back in easy.