I have been pulling my hairs. I have one of the Edimax router turned in to wired access point. When I run tests, it gives good throughput but when I try to stream Amazon Prime, it immediately gets stuck within few seconds and just continues to do that. I can still run the Speedtest with good numbers while Prime is having hiccups.
Because I have an ethernet switch between the main router and this Edimax, replaced that with old 100Mb hub but the behavior did not change.
I then purchased a cable tester (master/slave with 8-led) and checked all the cables and the wall outlet to make sure there are no wiring problems.
That Edimax is running with the latest firmware. I have set it with the same SSID and same password. Hand off seems to happen transparently. Only the signal strength and specific app (such Fing) indicate if I am running off the main or the Edimax router.
At this stage if I can get a different one with excellent wireless coverage, I am willing to spend some money but still I refuse to spend in three digits!
Because I have an ethernet switch between the main router and this Edimax, replaced that with old 100Mb hub but the behavior did not change.
I then purchased a cable tester (master/slave with 8-led) and checked all the cables and the wall outlet to make sure there are no wiring problems.
That Edimax is running with the latest firmware. I have set it with the same SSID and same password. Hand off seems to happen transparently. Only the signal strength and specific app (such Fing) indicate if I am running off the main or the Edimax router.
At this stage if I can get a different one with excellent wireless coverage, I am willing to spend some money but still I refuse to spend in three digits!