- Joined
- Sep 26, 2010
- Messages
- 9,807
I am confused by one thing on this wiring and want to be sure that I have it correct. One of the Jeep forums that I am on posted a nice write-up of how to wire the side-step lighting, I translated the wiring connection text into a picture using the schematics of the AOLE ASH-DD25 relay.
When the relay is energized, how do terminals #1 and #2 connect to one another to pass 12v to the lights? It is confusing, since it seems that terminal #1 and terminal #4 would be pass through once the relay is energized as would terminal #3 and terminal #2.
What am I missing here or will this work?
For the Relay
#1 + Red wire going to your lights
#2 + Red wire going to your battery/fuse
#3 + Blue trigger wire that will get power with the interior/door lights
#4 - Two black ground wires, one from the lights and the other going to the battery
When the relay is energized, how do terminals #1 and #2 connect to one another to pass 12v to the lights? It is confusing, since it seems that terminal #1 and terminal #4 would be pass through once the relay is energized as would terminal #3 and terminal #2.
What am I missing here or will this work?
For the Relay
#1 + Red wire going to your lights
#2 + Red wire going to your battery/fuse
#3 + Blue trigger wire that will get power with the interior/door lights
#4 - Two black ground wires, one from the lights and the other going to the battery