There is not a lot of info on the Redline webpage, and I didn't find any info on this site so I decided to E-mail them and get some spec's.
The PDS that he sent me actually gives a dropping point of 900F+.
Overall looks like good stuff. The wear numbers are higher than a couple of others though.
Quote:
The CV-2 uses a non-soap calcium thickener, it is
an NLGI #2 grease, a moderate paste consistence
with a smooth texture.
Quote:
Thank you for contacting Red Line Oil, I have attached the CV-2 data sheet.
CV-2 GREASE
Dropping point (ASTM D 566) >800°F
Oil seperation (ASTM D 1742) 5%, 30 hrs @ 350°F
Water Washout (ASTM D 1264) 1% @ 105°F
Timken (ASTM D 2509) unknown
Four Ball (ASTM D 2596) Load Wear Index
is 71.1 and the 4 Ball Weld is 400KG
(ASTM D 2266) 0.46
what percent Moly content 0.9%
Regards, Dave
Red Line Oil
The PDS that he sent me actually gives a dropping point of 900F+.
Overall looks like good stuff. The wear numbers are higher than a couple of others though.