Quick Question for first oil analysis

Status
Not open for further replies.
Joined
Mar 24, 2005
Messages
63
Location
Missouri
Hello;

I will be doing my first Blackstone Standard Analysis with a TBN. I have ordered the kit, but it has not arrived, and I want to change my oil.

I need to know how much to seal in a clean containers to await the arrival of the test kit.

Question:
How many oz or mil does Blackstone need to do each test?

Thanks!
 
Remember to clean the outside of the drainplug area well before you take out the drain plug. Run the engine for a 15 minute drive also before the analysis. Let the oil flow for a couple of seconds before you capture the oil in a very clean container. I think 12 is to much to save 8 oz.'s would be in a better range. I would keep the container in a warm area and shake well before you fill the Blackstone bottle.
 
Thank you everyone for the fast replies!
smile.gif


quote:

Originally posted by LargeCarMan:
Remember to clean the outside of the drainplug area well before you take out the drain plug. Run the engine for a 15 minute drive also before the analysis. Let the oil flow for a couple of seconds before you capture the oil in a very clean container. I think 12 is to much to save 8 oz.'s would be in a better range. I would keep the container in a warm area and shake well before you fill the Blackstone bottle.

What should I clean the exterior of the drainplug area with, to avoid chemical contamination?

For the TBN 8oz seems high, that's 1/4 of a quart.
Does Blackstone really need that much of my clean oil?
 
why cant you just wait for the bottle ?
it'll get to you quick.

where i live i'm just gonna stroll down the creek a couple times and just wipe it off with a rag. then when you pull the plug. let it drain long enough to get going good then get in there and fill'er up.
 
Just clean with a white towel and some rubbing alcohol....overkill..........maybe, I thought the 8 ozx would be a good range....overkill...maybe. Keep warm and shake....overkill...maybe. I just try to do things right...........overkill?........never!
 
Thanks for all the answers!

The O/C is done, and I saved a little over 4oz, so that should be fine.

I decided to clean the area of the drain plug with a white cloth and technical grade isopropyl alcohol so - lucky guess!
smile.gif


I will remember to post the UOA in the proper forum when the results are in. More Redline results for those interested.
 
Status
Not open for further replies.
Back
Top Bottom