Quality Valve stems

[ceast]

Have a lot of trailers with a lot of tires...I cover each tire and keep the weight off when not in use...I have a heavy Gen set That had new tire and stems 4 years ago...It gets hot and dry here...I move the gen set for the first time since new tires and had rotten stems...Tires not too bad....Any recommendations for heavy duty?..... Military Maybe ?" ..... where to go?....Charlie

 

[2oldtommy]

Metal stems should be available from any tire shop that specialize in truck and off road equipment. I assume that you have rubber stems that are rotting. FWIW--Oldtommy

 

[ceast]

I will check...I guess I don't get around much...Never heard of them, but will check today...Charlie

 

[skyactiv]

Get bolt in valve stems, not the pop in type.
http://www.summitracing.com/parts/wld-p613-0350/overview/

 

[dparm]

Originally Posted By: skyactiv
Get bolt in valve stems, not the pop in type.
http://www.summitracing.com/parts/wld-p613-0350/overview/


Do those seal as well?

 

[bdcardinal]

Originally Posted By: skyactiv
Get bolt in valve stems, not the pop in type.
http://www.summitracing.com/parts/wld-p613-0350/overview/


I have ones like those, but made by Eaton, on the Konig and Steeda wheels for my Mustang. They are awesome and don't leak. I had a set of tires stored for almost 6 years, they started at 35psi and the lowest was down to 28psi with the rest around 32.

 

[ceast]

I'm going to try 2 of these....If they fit well I'll put them on all trailers....Charlie

http://www.brandsport.com/grla-vs401.html?cmp=fwgs2011&gclid=CLHIzZeY1bgCFStxQgodsXgASQ