Post your latest small engine oil change

John Deer JS63C mower
Briggs OHV 7hp

Out: Pennzoil conventional 30w
In: Pennzoil conventional 30w
 
Husky 22" pusher. briggs 500series.
out: unknown (curb find)
in: 16oz shell 5w20, 4oz of STP

case ingersoll 224
Kohler k321as powered
out: shell sae30hd. about 20hrs use
Will be getting synthetic whenever i get to town.

2004 Kubota rtv900-camo
993cc IDI 3cylinxer
1025hrs
out: Mobil 1 0w40. 100hrs
in: amsoil "ame" planning uoa at 150hrs

ken
 
2006 Generac 17kw generator, GT-990 engine

Out: Napa synthetic 5w30
Napa 91394 filter

In: Amsoil synthetic 4 stroke, 10w30
Baldwin B-33 filter

Hoping for less oil consumption with the Amsoil.
 
Excell Pressure Washer with 6hp Briggs vertical shaft

Out: Rotella T 15w40
In: Rotella T6 5w40/Pennzoil Conventional 10w30 mix

Also changed pump oil with Briggs and Stratton synthetic pump oil

thumbsup2.gif
 
2005 McLane 3.5 hp lawn edger/trimmer

Out: Napa synthetic 5w30
In: half Napa synthetic 5w30, half Havoline conventional 5w30
 
Just winterized the snow thrower, Tecumseh something or another:

out: Mobil 1 0W-30
in: TGMO 0W-20

I thought why not. I'll keep an eye on the consumption but it really doesn't use any now.
 
The new Kohler 26 hp got Delo 15w40 after draining out some very fuel diluted factory fill that had about 5 hrs on it . I believe the fuel dilution was from being started and driven outside daily at our local sears store , never reaching operating temp . Honda gcv160 got rotella 5w40 left over from servicing the ATV's .. Mixed a fresh gallon of stihl ultra at 32:1 for the 2 stroke equipment . We are ready to go if it ever rains enough to kick the lawn into growing mode ..
 
Craftsman 21" mower with Tecumseh motor (free, needed a new carb):
Out - whatever the old black stuff that was in there before was.
In - G-Oil 30 wt.

Canadian Tire 21" single stage snowblower:
Out - factory oil 5w30
In - Amsoil HDEO 5w30
 
Murray 20" Push mower - 4.5hp Q Briggs engine - L head - 2003 Model
Got it for free - coworker was throwing it away because it didn't run. Gov spring was not connected to bracket.

Out - 11 year old original fill - that had seafoam in it.

In - Amsoil 10W30 Small engine oil - 20oz
 
Briggs and Stratton 17.5hp OHV - my cousin's lawn tractor

Out: black slime, Briggs and Stratton filter
In: Rotella T6 5w40, Napa Gold 1348

Also replaced:
-head gasket
-air filter
-spark plug
-fuel filter
-carb needle and seat
 
Went home over the long weekend and helped summerize my dad's snow blower, a 179cc Craftsman, put in fresh 5w30 Castrol GTX (I don't think my dad has ever changed the oil in 3-4 years). Swapped out the original Torch spark plug as well.

Also changed the Craftsman Briggs motor oil, same 5W30.
 
Husqvarna tractor w/ 27hp B&S
out - Mobil 1 High Mileage 5w30
in - Rotella T6 5W40

Troy-Bilt self propelled 6.75 B&S
out - Wolf's Head 30W
in - Rotella T 30W
 
21 HP Craftsman riding mower. 1 1/2 year OCI.

Out: Mobil 1 10w30

In: Mobil 1 10w30

1 3/4 qts

MC 910S filter
 
Last edited:
Back
Top Bottom