'01 Focus, about 101K car, about 3.2K and six months oil.
Out: Synpower 10W-30, AAP Total Grip filter
In: Meijer full syn 5W-20, Motorcraft filter
Wanted to get the 10W-30 out before real cold arrived, although the 10W-30 Synpower was okay on the three 10F mornings it saw this fall. No trouble starting and no unusual noises.
2009 Ford Fusion 3.0 Out Quaker State 5w20 conventional and Fram oil filter.In MotoMaster Supreme 5w20 conventional and Fram oil filter..Fusion had 5,437miles before oil change
Originally Posted By: Clevy
Originally Posted By: splinter
'11 GMC 5.3L Sierra
M1 0W-40 + Fram Ultra XG10575
6 months/~6100 miles/8% OLM remaining
So do you notice any differences running this oil vs a 5w-30.
Ha I was needlessly alarmed when I drove the AFM truck home new at its 'low' pressure (compared to other LSs and SBCs I've owned/driven).
Produced ~25-psi at hot 550-rpm idle but only ~35 during highway cruise.
Swapped out the FF asap with 0W-40 and picked up 5 psi on the freeway (idle remained essentially the same).
It's never had any other viscosity in it since then.
2007 FJ cruiser. 76k miles.
(new) Pennzoil Platinum 5W30
PureOne filter
Thing loves this oil. I change 5k-7k depending on what I've been doing, but this time I'm on 8500 miles. Seems good and clean still, so why not...