Post your latest oil change

2021 Subaru Outback
ODO: 14715 miles ( interval: 7289 )

out: 4.5 qt Valvoline EP 0W20 + Subaru ( Blue Fram ) Filter

in: 5 qt Dealer VRL0W20 + Subaru ( Blue Fram ) Filter

Note: Dealer Over-filled by ~ 0.5 qt.
Capacity = 4.5 qt. r.0: charged 6qts. Oil change and tire rotation was free
The New Math just doesn't account for half quarts. Plus its always good to add that extra quart or so for safety and profit!
 
Does your 1.6L GDI engine burn a lot oil at that mileage? How often do you use EPR? Just curious. I have the same engine in my Soul and my car will probably be a pile of dust before I get to that mileage but it would be nice to know.
It doesn't burn a drop. First time using EPR, just using it as preventative maintenance.
 
2013 F150 5.0
80,000 miles
6,000 on Kirkland 5w20 and FL500S.
Replaced with same. Engine is much quieter now.
Set to 50%.
DAF605DA-5854-416F-922D-D6FBBE7D2ED0.webp
 
2008 Acura MDX 3.7L, OCI: 5K miles, 159.5k on vehicle.

Out/off: Citgo Synblend 5W-20, Fram PH7317
In/on: Citgo Synblend 5W-20, Fram PH7317

2014 GMC Sierra 1500, OCI 5K miles.

Out/off: Dealer bulk oil, Omnicraft filter (purchased from a Ford dealer).
In/on: 8qts Mobil 1 AFE 0W-20, ACDelco PF63
 
My 2 last oil changes on my 2 vehicles were:
2008 Nissan Pathfinder with the awesome 5.6 liter V8 in it with 173,000 miles ( then) .
Filter: The K&N, Oil Valvoline full synthetic high milage in 10w-30
2011 Nissan Xterra witht he excellent VQ40DE V6 in it:
I was going to do the same full as above but one of my buddies borrowed my Xterra and as a thank you put a oil change at a local lube shop on it.
5w-30 Mobil 1 and a general filter.
I been meaning to replace that but the oil still look so clear at 4700 miles I cannot , yet, bring myself to do it.
Will be replaced with a high end filter (K&N or Mobil1) and either Valvoline full synthetic high milage in 10w-30 or M1 0w-40.
 
2012 Mazda 3.
In: M1 0W-20 AFE. Fram XG3614
Out: M1 0W-20 AFE, Mazda filter.
OCI: 1,900 but at 1 year and the car mostly sat for 8 months of it.

Dumb story, I thought I had some extra Mazda 3 filters around, turns out they were all for the CX-5. Bought the Fram at WM.
A couple days later I was going through a box and spotted two made in Mexico WIX filters for the 3. I guess i'll use them next.
 
Last edited:
Back
Top Bottom