Post 2 fav brands data sheets 2-3 weights each OTC

Status
Not open for further replies.
Joined
Jul 7, 2011
Messages
14
Location
Florida, USA
Mobil 1 0W-40 Value
Viscosity, cSt (ASTM D445)
@ 40º C 75
@ 100º C 13.5
Viscosity Index 185
MRV at -40ºC, cP (ASTM D4684) 31,000
HTHS Viscosity, mPa•s @ 150ºC, (ASTM D4683) 3.8
Total Base Number (ASTM D2896) 11.8
Sulfated Ash, wt% (ASTM D874) 1.3
Phosphorous, wt% (ASTM D4981) 0.1
Flash Point, ºC (ASTM D92) 230
Density @15.6 ºC, g/ml (ASTM D4052) 0.85
----------------------------------------------------
Mobil 1 5W-30
SAE Grade 5W-30
Viscosity @ 100ºC, cSt (ASTM D445) 11.0
Viscosity, @ 40ºC, cSt (ASTM D445) 61.7
Viscosity Index 172
Sulfated Ash, wt% (ASTM D874) 0.8
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 3.1
Pour Point, ºC (ASTM D97) -42
Flash Point, ºC (ASTM D92) 230
Density @15.6 ºC, mg/l (ASTM D4052) 0.855
------------------------------------------------------
Mobil 1 10W-30
SAE Grade 10W-30
Viscosity @ 100ºC, cSt (ASTM D445) 10.1
Viscosity, @ 40ºC, cSt (ASTM D445) 63.2
Viscosity Index 146
Sulfated Ash, wt% (ASTM D874) 0.8
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 3.0
Pour Point, ºC (ASTM D97) -42
Flash Point, ºC (ASTM D92) 232
Density @15.6 ºC, g/ml (ASTM D 4052) 0.859

vs.
Valvoline Synpower
Test 0W-20 5W-20 5W-30 10W-30
Vis @ 100C (cSt) 8.8 (sp)(sp) 8.65 10.5 10.5
Vis @ 40C (cSt) 47 48 59 64
Viscosity Index 170 160 169 153
Spec Gravity@60F 0.844 0.8473 0.8473 0.856
Density(lbs/gal) 7.0 7.1 7.1 7.14
Total Base No. 8.7 8.7 8.7 8.7
Flash COC (C) 220 221 223 223
Pour Point (C) -45 -42 -42 -39
CCS cP (C) 4600@-35 5000@-30C 4300@-30C 4200@-25C
MRV TP-1 cP (C) 35,000@-40C 13,500@ -35C 18,000@-35C 13,000@-30C
NOACK, wt. % loss 12 10 10 Sulfated Ash 0.93 0.93 0.93 0.93
Zinc/Phosp,wt.% 0.083/0.076 0.083/0.076 0.083/0.076 0.083/0.076
Sodium, wt% 0.049 0.049 0.049 0.049
Calcium, wt% 0.211 0.211 0.211 0.211

Valvoline MaxLife
Test SAE 5W-30 SAE 10W-30
Vis @ 100 0 C (cSt) 11.7 11.7
Vis @ 40 0 C (cSt) 70 76
Viscosity Index 162 152
Spec Gravity @ 60 0F 0.851 0.856
Density (lbs/gal) 7.1 7.1
Total Base Number 8.3 8.3
Flash Point COC ( 0 C) 225 235
Pour Point ( 0 C) -42 -39
CCS cP ( 0 C) 6000@-30C 5000@-25C
MRV TP-1 cP ( 0 C)20000@-35C 14000@-30C
Noack % off @ 250 0 C9.57
Sulfated Ash 0.93 0.93
Zinc/Phosph, wt% 0.083/0.0760 .083/0.076
Calcium/Moly,wt.% 0.191/0.030 .191/0.03
Sodium 0.049 0.049
 
Last edited:
Hey im sorry I put spaces in all of the above to make it easier to read but it took them out.
Just looking to share info of OVer the counter stuff.
And of course most liked. Without haveing to visit every blasted site in the industry.
I might be able to go back and us the(sp) command in HTML to put back my original spaces but I think i want to go window shopping oil while it is still early so that might just get a suck it.

I've been thinking about running M1 5w-30 because i like its 40c viscosity. And altho it does not post phos/zinc numbers an additive could cure any deficiency there. Redline is coming up as not very cost effective altho it's not off the map just yet. But am looking for convenience as well.

But i think the above with Redlines breakin which might be in stores....could be a very healthy comparable alternative.



*****(sp)(sp) does not work...html is disabled in favor of ubbcode (wtefff is that?)***********

Post what you can of what you like and run.
No links...they suck and you can't compare them easily...and not easy enough to reference all in one thread.
 
Last edited:
-------Mobil 1 5W-20----------------
SAE Grade 5W-20
Viscosity @ 100ºC, cSt (ASTM D445) 8.9
Viscosity, @ 40ºC, cSt (ASTM D445) 49.8
Viscosity Index 160
Sulfated Ash, wt%, (ASTM D874) 0.85
HTHS Viscosity, mPa•s @ 150ºC (ASTM D4683) 2.75
Pour Point, ºC (ASTM D97) -43
Flash Point, ºC (ASTM D92) 230
Density @15º C g/ml, (ASTM D4052) 0.852

--------------Valvoline Synpower 5w-20--------
Test 5W-20
Vis @ 100°C (cSt) 8.65
Vis @ 40°C (cSt) 48
Viscosity Index 160
Spec Gravity @ 60°F 0.8473
Density(lbs/gal) 7.1
Total Base No. 8.7
Flash COC (°C) 221
Pour Point (°C) -42
CCS cP (°C) 5000@-30C
MRV TP-1 cP (°C) 13,500@ -35C
NOACK, wt. % loss 10
Sulfated Ash 0.93
Zinc/Phosphorus, wt.% 0.083/0.076
Sodium, wt% 0.049
Calcium, wt% 0.211
 
Status
Not open for further replies.
Back
Top Bottom