Plowing 4” with 18 power wagon 9’2” v

[Seppie10]

So we got a lil snow today! I have a vid but I guess we can’t post them.

 

[Rand]

You have to upload to youtube or similar then post link.

 

[Rob_Roy]

I have never seen a snowplow on a Power Wagon. Any interference between the factory winch and the plow frame?

 

[Seppie10]

Boss mounts and plows don’t interfere, recommend to remove winch though because of that added weight.

I am using yellow sumo runners in front to help support.

Other than that it’s a great pusher.

5 years of plowing with it so far

 

[Seppie10]

January 17, 2026

 

[Seppie10]

Oh I think I figured out how to get the short vid to you folks.

 

[Seppie10]

That was a brain drain after 8 hours of plowing

 

[Rob_Roy]

I am using yellow sumo runners in front to help support.

I was going to ask how the lighter springs in the PW worked with the plow. I run a 2500 Tradesman with a Fisher straight blade (w/ extensions), the front end handles it fine but 300 lbs of ballast behind the rear axle makes the truck sit a lot more level.

 

[Seppie10]

Yes - ballets in bed is best. But on the smaller storms I don’t add. 6” + I add big wood rounds in bed.