P2096 P2094 2015 Jeep JK 3.6

[Yolo]

Throwing P2094 and P2096. I don’t believe both the O2 sensors go bad at the same time. Any suggestions?

 

[wwillson]

I got a P2094 on one of my Pentastars and I thought it was the cam position sensor. The sensor was fine, but a mouse had chewed the wires to the sensor. Check the wires.

https://bobistheoilguy.com/forums/t...or-the-3-6l-pentastar-vvt-actuator-92.367280/

 

[Yolo]

Mr. Wilson I think you may be right that it’s electrical and not the sensors themselves - there were also two codes in there for no signal for those O2 sensors - the CEL comes and goes. A few years ago I put an Optima yellow top battery in there and the negative post is too loose and it’s been causing weird electrical issues.

just replaced the battery with a Mopar OEM and have a much more solid connection. I cleared the two stored and pending codes and will have my son drive it for a week and report back.

 

[meep]

Are they both getting the right power and ground?

 

[Yolo]

Are they both getting the right power and ground?

Haven’t checked them yet but I’d assume so, the codes come and go.

 

[clinebarger]

P2096 & P2098 maybe?