Oversized filter for 98 Nissan Sentra SE (SR20DE)

Status
Not open for further replies.
Joined
Jul 4, 2004
Messages
31
Location
Chandler, AZ
Can I use a 51536 instead of the 51365? The only difference I can see is the height (0.825" taller). Here are the spec of these filters from the WIX website. This is for a 98 Nissan Sentra SE (SR20DE).

Part Number: 51365
UPC Number: 765809513655
Style: Spin-On Lube
Service: Lube
Type: Full Flow
Media: Paper
Height: 2.577
Outer Diameter Top: 2.685
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233

Part Number: 51356
UPC Number: 765809513563
Style: Spin-On Lube
Service: Lube
Type: Full Flow
Media: Paper
Height: 3.402
Outer Diameter Top: 2.685
Outer Diameter Bottom: Closed
Thread Size: 20X1.5 MM
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.475 2.173 0.233
 
The WIX 51356 is the direct replacement size for the OEM 15208-9E000. So it is ok to use, but you can get bigger. Since the OE bypass setting is 14psi you can use the Baldwin B1431 which is also 14psi and 4" high, just a tad bigger.
Up to you though. I may try a WIX at my next interval.
 
Anyone having any luck finding the Wix 51344 with the silicone ADBV (red) and the new media? All the parts stores around here have old stock with the nitrile (black) ADBV.
 
Status
Not open for further replies.
Back
Top Bottom