Oreilly brand rotor already has a wear ridge?

Joined
Nov 29, 2009
Messages
9,514
Should have just had the original rotors turned. 15,000 miles and I'm already seeing a wear ridge. Ran 200,000 miles with hardly a wear ridge on the factory rotors except for this one rotor that I ran down to the backing pad which is why I replaced it.

Vehicle: 2007 dodge ram 2500 diesel
 
Couldn't this be a sticky piston or collapsed brake hose? Or slider pin hanging?

How do we know the rotor itself is at fault?
 
Must be a combo of soft steel rotor and the pads you chose.
I'm still on original front rotors on Sportage, over 100k miles, barely worn, smooth, on 3rd set of pads including originals.
 
Should have just had the original rotors turned. 15,000 miles and I'm already seeing a wear ridge. Ran 200,000 miles with hardly a wear ridge on the factory rotors except for this one rotor that I ran down to the backing pad which is why I replaced it.

Vehicle: 2007 dodge ram 2500 diesel
You get what you pay for.
 
Must be a combo of soft steel rotor and the pads you chose.
I'm still on original front rotors on Sportage, over 100k miles, barely worn, smooth, on 3rd set of pads including originals.
That's what I'm thinking. They cheaped out on the steel
 
Back
Top Bottom