Oil Extractor

Status
Not open for further replies.
Joined
Oct 8, 2017
Messages
1,638
Location
USA
Pros and cons of using an oil extractor instead of crawling under the vehicle. Ready, set, go!

Also, if you use an extractor, or know of good ones, what brand? Not saying I'd use one necessarily, but they sound so convenient and simple!
 
I find it useful for servicing my transmissions, and brake fluid changes/bleeding. It makes transmission pan drops a lot neater. Oil changes on my current fleet there's no upside at all, and one more thing to clean out..
 
Have the HOLT from H.F. that was $89.99 . Works great , especially for small engines , leaves very little oil in motor . Recommend if you ain't what you used to be .🧓 = 😬 or 🤕 or 🤕 + 😬
 
As long as you can find a rigid tube that fits through the dipstick tube. No negative at all.
My Mityvac 7201 works as extractor and dispenser as well, can hold 8 qts.
 
Used my Mityvac yesterday to change the oil on my mom’s 14’ Grand Caravan.

I love that thing. Easiest oil change I’ve ever done.
 
I used to think extractors were stupid and were for whoosies.
I guess that makes me stupid and a whoosy.
I love my MityVac.
Nowadays, I use a Fram XG for 2 or 3 services. Yesterday's oil change did not require warshing may hands afterwards.
Here are a '13 Civic and '13 GS350
1624221058144.webp

1624221088574.webp

1624221127763.webp

1624221155748.webp
 
Given the choice I will never go under a car again to change the oil as with the filter on top an extractor makes oil changes so easy and clean. I started with vacuum extractor but use now an electric pump which is even better as the used oil can go straight into the waste container.

Any concerns about extraction getting all of the old oil out were dispelled on the first change when I measured the quantity carefully.
 
Given the choice I will never go under a car again to change the oil as with the filter on top an extractor makes oil changes so easy and clean. I started with vacuum extractor but use now an electric pump which is even better as the used oil can go straight into the waste container.

Any concerns about extraction getting all of the old oil out were dispelled on the first change when I measured the quantity carefully.
After I sucked the earl outta the GS, I pulled the drain plug and let it drain for another half hour and even tilted the car to remove as much as possible. It did not even cover the bottom of the oil pan. Maybe 1/2 cup at most. And your dealer or quickie lube ain't gonna take this long to drain your oil.
Use with confidence. If it makes you feel better, change your oil a little more often. I love my MityVac.
1624222393555.webp
 
I have a Mityvac extractor which works great for transmission fluid swaps and oil changes on the jet ski. Also have one at work to change oil on our Bobcat, which already is a pain in the rear to work on.
 
Pros and cons of using an oil extractor instead of crawling under the vehicle. Ready, set, go!

Also, if you use an extractor, or know of good ones, what brand? Not saying I'd use one necessarily, but they sound so convenient and simple!

Mityvac.

I wont go back to always getting under a vehicle if I dont have to.
 
Even if you don't replace the oil filter, I still remove and drain it.

The gaskets aren't designed for multiple installs, and the rest of the engine contains far more oil than whats left in the filter anyway.

Everyone gets to maintain their car the way they want though.
 
Status
Not open for further replies.
Back
Top Bottom