New tool thread

[JWC86]

Where did you buy this, wouldn't mind getting one. Always dumping oil on the front cradle on my son's Passport.

As rstsco said above, just have to search that part number and you will find a bunch of places, prices, and especially shipping prices vary so shop around.

 

[Pablo]

I bought a separate metric and fraction kit of hex (Allen) bits for my drivers. I have some odds but didn’t have a 5mm so I just cut a cheapie Allen wrench

Odd I never had a kit. I have Torx kits and most standards

 

[Tomioka]

They were on sale at NAPA when I delivered 3 pallets marked going to NAPA DC from Clore Automotive. Freshest as they can be.
Also grabbed an OBD-II to 12v cigarette plug memory saver cable too.

 

[AutoMechanic]

Couple new tools the last few days. Took advantage of the 40% off torque wrenches and picked up this 3/8. One of my coworkers has it and it’s the only one that will fit under the seats for the Toyota OCS sensor recall. Decided since I’ve borrowed it about 20 times that I had to get my own. $65 with the discount. And then a fluid transfer pump aka “big syringe” as I call it lol. Great for differential or transfer case fluid changes and certain other fluids too. Another tool I’ve had to borrow so I got my own. I think I paid around $17 for the syringe on eBay.

 

[Timmastertech]

Didnt take a pic but picked up the Quinn 1/2 inch drive master set on the parking lot sale to keep in my teaching kit so I dont have to empty my shop sets out of my toolbox every time I teach a class

 

[odie]

Couple new tools the last few days. Took advantage of the 40% off torque wrenches and picked up this 3/8. One of my coworkers has it and it’s the only one that will fit under the seats for the Toyota OCS sensor recall. Decided since I’ve borrowed it about 20 times that I had to get my own. $65 with the discount. And then a fluid transfer pump aka “big syringe” as I call it lol. Great for differential or transfer case fluid changes and certain other fluids too. Another tool I’ve had to borrow so I got my own. I think I paid around $17 for the syringe on eBay.
View attachment 295763

Have the 3/8 drive as well . Works great so far . Like the loud click and dial setting . Just exercised it . Says every 6 months in manual .

 

[odie]

The syringe would work great for small engine oil changes . You can get one through T.S.C.. May have to get one .

 

[D60]

The syringe would work great for small engine oil changes . You can get one through T.S.C.. May have to get one .

I recently found it works quite well for emptying a toilet bowl if replacing a toilet.

 

[Pablo]

I recently found it works quite well for emptying a toilet bowl if replacing a toilet.

I didn't read that right the first time.