New tool thread

I'm a big fan of Koken tools. Even though I already own enough 3/8" drive extensions, I saw this 6 piece set of Koken extensions on Amazon at an attractive price of $51.56 and placed my order. I like the knurling on the drive end. Koken-USA sells the set for $94.

Koken Set
Thanks - and ordered!

Thanks for making me spend more money, jerk! ;)

I too am drowning in 3/8" extensions but I really like the look of these.

I got them at the same price, I wonder when the bot will jack the price?
Same. Now I just need a good 1/4” set.
 
In addition to Koken tools, I also like my Hazet combination wrenches and my Hazet sockets. I only have a few standard length Hazet sockets in 3/8" drive, but I like their design. I have had my eyes on a set of Hazet deep sockets for the last 2 years and finally saw a good price on them, at Amazon Global Store: $156.12 with free shipping (plus $9.37 import fees). This is a 10pc set, 10mm-19mm, 3/8" drive, 6-point. Mister Worker sells this set for $212, KC Tool sells it for $283.

Hazet 880LG/10H at Amazon

https://www.hazet.de/en/products/ha...ation/307/socket-set-6-point?number=880LG/10H
 
View attachment 172298
Only the finest for my rusty JIS fasteners 👀
Extra 🇯🇵, for a Minivan assembled in Ohio 😳
Nissan and their love of the JIS 🙄
This thread has put me onto a lot of really good tools. I find great satisfaction in finding great tools at more reasonable prices.
I recently bought some Vessel JIS cross point screwdrivers and like them very much.
 
6695 (import copy) for Ford vac hub seals pre-'05. Was under $24 on AWD

Lisle 65700 3V plug removal tool

Lang plug gapper
20230821_181925.webp
 
Astro 93812 3/8 drive in 1/4 long ratchet body.

Astro on the left with a nano 14mm socket, GW 84 tooth on the right with a williams 14mm socket. Looks like the nano is a little over 1/8th shallower but the body is fatter then i'd hoped.
1692818847936.jpg


The Astro head itself though is quite a bit smaller. It will be useful with this alone.

1692818902729.jpg


I want the Astro 78318 flex version but so does everyone else apparently.
1692818747708.webp
 
Last edited by a moderator:
About a year and half ago I got back onto working on motorcycles after a few year break. I quickly decided I needed to upgrade my metric wrench set. The Mastercraft (Canadian Tire) set was in rough shape with chewed up open ends and they just weren't great to start with.

I debated getting a really good set like Wright, Snap-On or Proto but honestly I just didn't want to spend that much so I picked up a set of Tekton wrenches.

The Tektons really weren't bad and were a upgrade from what I had but when I had to use a open end they left something to be desired.

After watching TTC wrench testing and seeing how well they performed I ordered a set of Wrightgrip 2.0s last April. They seem to be the best value compared to the other top performers or at least with the prices for Proto being 2-3 times the Wright in my area.

After a 4 month wait they arrived yesterday.
image003.jpg

image001.jpg

image002.jpg


First impressions were good. They are a hefty wrench and have a good "feel in hand" with thick beams and nicely rounded edges.

I did end up using the 10mm and 17mm last night and I think I'll be quite happy with the set.

The Tektons will move into my truck tool kit as a upgrade to the $20 amazon set.
 
Last edited:
About a year and half ago I got back onto working on motorcycles after a few year break. I quickly decided I needed to upgrade my metric wrench set. The Mastercraft (Canadian Tire) set was in rough shape with chewed up open ends and they just weren't great to start with.

I debated getting a really good set like Wright, Snap-On or Proto but honestly I just didn't want to spend that much so I picked up a set of Tekton wrenches.

The Tektons really weren't bad and were a upgrade from what I had but when I had to use a ope (y) n end they left something to be desired.

After watching TTC wrench testing and seeing how well they performed I ordered a set last April. They seem to be the best value compared to the other top performers or at least with the prices for Proto being 2-3 times the Wright in my area.

After a 4 month wait they arrived yesterday.
View attachment 174722
View attachment 174723
View attachment 174724

First impressions were good. They are a hefty wrench and have a good "feel in hand" with thick beams and nicely rounded edges.

I did end up using the 10mm and 17mm last night and I think I'll be quite happy with the set.

The Tektons will move into my truck tool kit as a upgrade to the $20 amazon set.
I have them, they work great. You will like them.

And they are USA made. (y)
 
SnapOn S8672D tailshaft bushing puller. I already had the first version (Rev A) but they went with more fingers over the years. I never got to use the A because the BW T10 I encountered wound up having no bushing where there should be one, thus nothing to pull. Still, the D came up and I wanted the last version ( these are all now long discontinued)

Also I decided to try this magnetic OTC oil drain plug tool for hot oil. It's relatively well reviewed but I haven't had a chance to try it yet.
20230830_114922.webp
 
Just finished moving over to a 34" HF service cart from my old 5-drawer. The 25% no restrictions coupon pushed me over the edge putting the new cart at $450 (+ tax)

The larger carts are conspicuously missing a shelf or a side compartment for chemicals. I happened to have an extra HF shelf in orange NIB so I mounted that. I agree it looks funky but somehow I suspect it will function as a shelf just as well as any other color, although my aging eyes appreciate the contrast of small parts on brighter colors, making them easier to distinguish.....thus the orange is actually better for me.

I also just happened to have the red MAC tray from the pawn shop, so I mounted that on the left. It obstructs the handle somewhat but I never use the actual handle to roll these carts around anyway -- I just grab the upper lip or side(s). I'll move it down if necessary but I want to see how I feel about having the chemicals up higher first.

And I know it's blasphemous to some but I pull the lids. I don't need to lock it and the open lid is just too "muchy". It makes the cart feel much larger and it's too tall when open to easily roll under vehicles on the lift unless they're at max height. I understand a lot of guys like the lids and that's cool -- you do you. We all customize our setups to our liking.
20230831_133037.webp
20230831_133142.webp
 
In addition to Koken tools, I also like my Hazet combination wrenches and my Hazet sockets. I only have a few standard length Hazet sockets in 3/8" drive, but I like their design. I have had my eyes on a set of Hazet deep sockets for the last 2 years and finally saw a good price on them, at Amazon Global Store: $156.12 with free shipping (plus $9.37 import fees). This is a 10pc set, 10mm-19mm, 3/8" drive, 6-point. Mister Worker sells this set for $212, KC Tool sells it for $283.

Hazet 880LG/10H at Amazon

https://www.hazet.de/en/products/ha...ation/307/socket-set-6-point?number=880LG/10H
My Hazet socket set arrived today, shipped from Amazon-Germany.

DSC01686.webp
 
Just finished moving over to a 34" HF service cart from my old 5-drawer. The 25% no restrictions coupon pushed me over the edge putting the new cart at $450 (+ tax)

The larger carts are conspicuously missing a shelf or a side compartment for chemicals. I happened to have an extra HF shelf in orange NIB so I mounted that. I agree it looks funky but somehow I suspect it will function as a shelf just as well as any other color, although my aging eyes appreciate the contrast of small parts on brighter colors, making them easier to distinguish.....thus the orange is actually better for me.

I also just happened to have the red MAC tray from the pawn shop, so I mounted that on the left. It obstructs the handle somewhat but I never use the actual handle to roll these carts around anyway -- I just grab the upper lip or side(s). I'll move it down if necessary but I want to see how I feel about having the chemicals up higher first.

And I know it's blasphemous to some but I pull the lids. I don't need to lock it and the open lid is just too "muchy". It makes the cart feel much larger and it's too tall when open to easily roll under vehicles on the lift unless they're at max height. I understand a lot of guys like the lids and that's cool -- you do you. We all customize our setups to our liking.View attachment 176049View attachment 176050

I like it with the lid pulled, it makes life easier. I don't have one but I would do the same, I am still using an old Hazet 166N as a drag around.
 
I bought the Drill Doctor 500X a few weeks ago, I usually sharpen the 118° on the bench grinder but not the 135° with a split point.
I don't use anything larger than 1/2"/13mm in drill bits anything larger is usually a hole saw so the 750X is not needed.
This does a nice job especially splitting the point, it takes a little practice but once you get the hang of it, it is not difficult. I had a couple of broken M42 bits, I ground the basic profile on the bench grinder and finished them with the drill doctor, they came out perfect. In 8 bits it already paid for itself.

https://www.amazon.com/Drill-Bit-Sh...93661856&sprefix=drill+d,aps,104&sr=8-15&th=1
 
Back
Top Bottom