Got new timing, serpentine, and ac belts replace by local independent shop. The Elantra now has a very loud squeal upon cold start, turning sometimes and changes with rpm’s. I tried squirting water on the visible belts and it did not seem to change the noise. Its very apparent to me it’s the timing belt. It runs and drives fine. But the skeretch! Sounds like my it’s some old broken down beater which it definitely is not. I’ll be going to the shop ASAP but in the mean time my questions are if it will do any damage to the belt or any other part if the vehicle is driven to work a few miles. I’m preparing myself for the ensuing battle of the shop not taking responsibility and make things right. I have video of cold start noise, noise changing with rpm, and spraying pulleys with water. Should I ask them to buy me a new belt? I asked them to use all oem parts to avoid this situation. Also noticed they didn’t change the pulley. Over $1000 total for water pump, thermostat, belt job, and new flex pipe in which it failed inspection for. They charged 3.5 hrs for belt and pump job, .75 for exhaust. I’m not complaining about the labor rate as I think that was extremely quick! Just wish I didn’t have sqeal! They also forgot to balance a tire I requested.