Those are rare options indeed. Think I've had 5.. always got offers couldn't turn down. This one is staying for life. I'd like to retire it to the occasional drive but haven't found a yellow Spark manual yet. I like the odd ball colors.I've owned at least 3 of those Festiva's once upon a time. I even had a couple of those rare under seat trays & power steering. lol
Here's one.
View attachment 140033
This was my yard about 14 years ago.
View attachment 140032
Wheel adapters or did they just fit? They give the honda a luxury appearance.Family hauler. 2009 Honda Pilot FWD.
...on Cadillac CT6 wheels & tires...
Smooth as butter after VCM deactivation. MPG is same now as it was with the rattly vibrating VCM.
View attachment 142377
They just fit. Center hub bore is smaller on the Honda, so almost any 5X120 wheels fits. Cadillac, BMW, Land/Range Rover, Acura (duh), Jaguar, and some others that I can't remember now.Wheel adapters or did they just fit? They give the honda a luxury appearance.
Thanks for your response. That sounds like the Honda needs a "Hub centric" wheel. If the cadillac wheels aren't fitting the hub center snuggly then it's putting all the weight on the lug nuts. I don't know a whole lot about it all & perhaps it's doable but thought I would share what's on my mind.They just fit. Center hub bore is smaller on the Honda, so almost any 5X120 wheels fits. Cadillac, BMW, Land/Range Rover, Acura (duh), Jaguar, and some others that I can't remember now.
Technically yes. You are correct. Honda center hub is 64.1mm, while Cadillacs is 66.9mm. But... I'm a cheapskate who likes to live dangerously. So no hub rings here, at least not yet. Hopefully these extra 2.8mm in diameter won't bite me in the rear end, ever... Time will show, I'll update if something happens.Thanks for your response. That sounds like the Honda needs a "Hub centric" wheel. If the cadillac wheels aren't fitting the hub center snuggly then it's putting all the weight on the lug nuts. I don't know a whole lot about it all & perhaps it's doable but thought I would share what's on my mind.
I'm not one to say anything so no worries. I had some 18" Cadillac Escelade wheels bored out to fit the Nissan Hardbody hub. The guy went over on all 4 of them by at least an 1/8". I threw them on but the truck has been sitting for the last 14 years so I'm not sure if they'll hold or not. lolTechnically yes. You are correct. Honda center hub is 64.1mm, while Cadillacs is 66.9mm. But... I'm a cheapskate who likes to live dangerously. So no hub rings here, at least not yet. Hopefully these extra 2.8mm in diameter won't bite me in the rear end, ever... Time will show, I'll update if something happens.
I bought an 02 coupe last week. Stock with only 60k on the clock.2002 Z06 ... bought it new, and still have it. Great car so far.
I wouldn't even be able to point one of these out since they just aren't out in the wild. One thing I noticed on your picture here of the SAAB is the Wheels are VERY SIMILAR to a turbo wheel. I'm sure you're aware that they have been putting turbo's on since the 70's so this fit's them well. Too bad GM management spelled the end of this great company. I really want a 9-3 & found out they are still paying for airbag recall on them.View attachment 143968
I haven't seen a Saab 9-⁴x in some time