Lets see the cars!!!!

CD1A81D7-DB9D-4629-B64B-BDA67F6AAE50.jpeg
 
I've owned at least 3 of those Festiva's once upon a time. I even had a couple of those rare under seat trays & power steering. lol

Here's one.

View attachment 140033

This was my yard about 14 years ago.

View attachment 140032
Those are rare options indeed. Think I've had 5.. always got offers couldn't turn down. This one is staying for life. I'd like to retire it to the occasional drive but haven't found a yellow Spark manual yet. I like the odd ball colors.
 
They just fit. Center hub bore is smaller on the Honda, so almost any 5X120 wheels fits. Cadillac, BMW, Land/Range Rover, Acura (duh), Jaguar, and some others that I can't remember now.
Thanks for your response. That sounds like the Honda needs a "Hub centric" wheel. If the cadillac wheels aren't fitting the hub center snuggly then it's putting all the weight on the lug nuts. I don't know a whole lot about it all & perhaps it's doable but thought I would share what's on my mind.
 
Thanks for your response. That sounds like the Honda needs a "Hub centric" wheel. If the cadillac wheels aren't fitting the hub center snuggly then it's putting all the weight on the lug nuts. I don't know a whole lot about it all & perhaps it's doable but thought I would share what's on my mind.
Technically yes. You are correct. Honda center hub is 64.1mm, while Cadillacs is 66.9mm. But... I'm a cheapskate who likes to live dangerously. So no hub rings here, at least not yet. Hopefully these extra 2.8mm in diameter won't bite me in the rear end, ever... Time will show, I'll update if something happens.
 
Technically yes. You are correct. Honda center hub is 64.1mm, while Cadillacs is 66.9mm. But... I'm a cheapskate who likes to live dangerously. So no hub rings here, at least not yet. Hopefully these extra 2.8mm in diameter won't bite me in the rear end, ever... Time will show, I'll update if something happens.
I'm not one to say anything so no worries. I had some 18" Cadillac Escelade wheels bored out to fit the Nissan Hardbody hub. The guy went over on all 4 of them by at least an 1/8". I threw them on but the truck has been sitting for the last 14 years so I'm not sure if they'll hold or not. lol
 
PXL_20230227_174820670.jpg

Cars at the end of their life 😔
I've seen the brave little toaster, I know how this ends 😭
PXL_20230303_200701623.jpg

Parts truck, now with Easter Lamb cakes 🤷‍♂️
PXL_20230303_215147033.jpg

This Corolla has seen some action 😳
PXL_20230307_174051315.jpg

Fresh W123 Turbo 🏃‍♂️🏁
PXL_20230308_124240310.jpg

I haven't seen a Saab 9-⁴x in some time 😲
PXL_20230308_161032018.jpg

Freshest Tercel I've seen in decades 👍
PXL_20230308_195904443.jpg

Poor burned out 2CV, appears to be a 1983 LHD Beachcomber, which had to be imported personally, I don't think they were sold in the states that late
PXL_20230308_221248909.jpg

Hella sus Subaru drivers 😳
 
View attachment 143968
I haven't seen a Saab 9-⁴x in some time 😲
I wouldn't even be able to point one of these out since they just aren't out in the wild. One thing I noticed on your picture here of the SAAB is the Wheels are VERY SIMILAR to a turbo wheel. I'm sure you're aware that they have been putting turbo's on since the 70's so this fit's them well. Too bad GM management spelled the end of this great company. I really want a 9-3 & found out they are still paying for airbag recall on them.
 
Back
Top