Klüberalfa HM83-801 Equivalent?

[00scrub]

I was looking to source some Klüberalfa HM83-801 or an equivalent grease. I can't seem to find any for sale in the US.
It seems to be a thick (80cst) PTFE high temp grease:
https://www.qualitybearingsonline.c...DS PDFs/Kluber/Klüberalfa_HM_83-801_EN_en.pdf

I was looking at Krytox, but they didn't quote have something as thick:
https://www.krytox.com/en/products/xht-greases-oils

Anyone know of an alternative or US based retail supplier?

 

[GSCJR]

I'd ask here:
https://www.super-lube.com/contact-us

 

[facility1]

what are you using or need this grease for? please be more specific on your needs, we have used (or similar) Kluber brand grease at work on a 3000 hp Onan generator end bearings (contractor supplied ) and is very expensive, and certainly good,/ this grease can be viewed as more of a specialty requirement grease, there are many over the counter greases that may work well on whatever your application is.

 

[00scrub]

I looked at Superlube and didn't see anything that had a similar viscosity.

facility1: it's for lubricating a clutch guide sleeve on a Porsche GT3. It's specifically called out in the workshop manual.

 

[00scrub]

I was able to find the Porsche PN for a small tube of this grease. It’s odd it didn’t show up in the other PETs.

Porsche PN: 00004330512 50g tube for about $70-$120

Parts diagram actually showing it:
https://www.eurospares.co.uk/Porsche/997/2010_(997-2)/PartDiagrams/301-000/CLUTCH