Jeep 3.6 filter

[1blkc5]

Running the premium guard PG6296EX in my jeep with 2k miles . I change oil every 6months .

 

[4wd]

Ran this Ecogard for 3k after adding 20% EC30 to a 5k net run on Jeep 3.6 … pleats all clean …
Last picture is the PG that went in for this OCI …

 

[1blkc5]

I wonder what caused that

 

[4wd]

I wonder what caused that

What ?

 

[Lawnman23]

What ?

I'm guessing he is referring to the wavy pleats.

 

[HemiBenny]

Running the premium guard PG6296EX in my jeep with 2k miles . I change oil every 6months .

Is this just an FYI?

Is there a question or response you’re looking for?

 

[1blkc5]

yes the wavy pleats sorry the picture didnt load

 

[Fair enough]

I wonder what caused that

I am guessing material stretches under the flow patterns, not rigid enough?
There is nothing wrong with your questions or posts.

 

[Auto tech]

Keep an eye on the oil cooler/ filter housing on that jeep. Those have a high failure for leaks on the 3.6 and 3.2

 

[ZeeOSix]

Lots of oil filters end up with wavy pleats after use. On cartridge filters, installation can cause some of that pleat distortion. Still functional as long as the pleats aren't widely spaced and tear from oil flow dP. Disqualification from the "pleat beauty contest", lol.

 

[bullwinkle]

yes the wavy pleats sorry the picture didnt load

Cartridge is a little too long, gets compressed during use. The first cartridge I used in my Ecotec 2.2 Vue looked more squashed than that after only 1K on RGT 5W30 & HPL Engine Cleaner 30 (was Purolator made R series CQ).