Originally Posted By: Popinski
I know some rear wheel drive cars with both LSD and traction control. How the heck do they both work together?
if the LSD is spinning both tires.. then what's the job of the traction control system? I know both the Dodge Challenger and Hyundai Genesis Coupe have this weird system.
The answer is slightly different for different kinds of diffs.
Clutch-type diffs are made to start locking up when you apply gas or brakes. Usually, they will only lock up to a certain point; more locking gives better traction, less locking gives better drivability and a more forgiving nature. My car, for example, has a 25% lock. This is way on the drivable/forgivable side of the spectrum, which is nice; on the flip side, it will still permit a fair amount of slip under extreme conditions (e.g. one wheel on ice while the other is on pavement). This can overheat and wear out the clutch packs. A traction control system can prevent that by applying a brake or limiting the throttle.
Some modern diffs are computer controlled. They can vary the amount of lock they provide, and usually can also send the torque to one wheel or the other. For those cars, that torque split/lockup control is part of the traction control system. However, the computer still might apply a brake if one wheel is way out of control.
Viscous diffs act like very loose clutch-type diffs. Not only are they prone to overheating in extreme circumstances, but they also don't provide as much of a traction advantage. A traction control system can prevent overheating and improve traction.
Torque vectoring (a.k.a. helical or "Torsen" type) diffs basically manage torque split on their own. The catch is that they only work if both wheels have at least some traction. If one wheel is spinning freely (e.g. on ice or in the air), all bets are off. A traction control system can cut in if that happens, applying just a little bit of brake to the spinning wheel to make everything work again.